I am having a problem with my A/C unit cooling fine one minute and blowing hot the next. Once I get moving and the RPM go up it cools down again. It might do this once a month or ever hour. I've been knowing that I had a small leak for some time now. But it was cheaper to put a can of R-134a in every 3 months or so than spend the money to fix the leak. I was thinking it was leaking out the evap core but now I think it might be a bad compressor. So I went to do the one can thing and I usually just hook up the low pressure side. This time I hooked up both sides and come to find out the high pressure side of my system is only at about 50 to 55 psi. The suction side when full I run about 50 psi. With such a low high pressure side I am thinking many the leak is in the compressor seal and the compressor is just shot. I live in south Louisiana so the A/C gets used even during the winter months and the truck has 190,000 on the original compressor. Any help would be,,,,,,,, well helpful.