A Cool Hitch!

[HDH]

www.locknroll.com/
Doug.

 

[Okie-Go]

Now I have see evreything(almost). I wondr how they can be as stout and safe as a regular hitch? I don't think I will be getting one.

------------------
2001 quadcab slt 2500 HO 6spd. LWB,2wd,dk garnett red, trailer tow package,camper special, anti spin 3. 54 axle, speed liner,oversized stainless steel chicken slide,66 gallon in bed aux. tank,K&N air filter,Reese 20k hitch, Terry 2000 EX 30ft. double slide 5er, 2000 20ft gooseneck for haulin jeep, firewood and huntin stuff. 5X12 tagalong for haulin the 4 wheeler. Okie Newton

 

[illflem]

Cool idea, too expensive though. A pintle hitch does much the same things.

 

[Shovelhead]

I see what would appear to be at least 3 points on this that would be metal to metal with no bearing or grease fittings.
Interesting concept, but want to see how much play/wear will develop after a couple of thousand miles pulling a heavy load.

------------------
Ed Anderson
99 3500 Sport,6x4,QC,Black,Auto,4. 10,Everthing 'cept leather,stock until warranty runs out.
'76 H-D FLH, '98 FLHTCUI
"Never ride faster than your guardian angel can fly"

 

[MCummings]

Shoot, Just custom make a Driveshaft into a "ball-and-hitch",, Use the "U-Joint".

Weld Half of the driveshaft onto the trailer, Then put the "u-Joint" and get the right sized pipe on the other side of the u-joint to fit into the reciever hitch.

UH,, Then yah have to make it be able to twist/rotate/roll somehow. Details... Details. .

MerrickNJr

 

[Ladders]

Dont recall where I sawed it but there is a receiver to 5th (or was it 5th to receiver) conversion. Funny looking unit as it puts the hitch out back over the bumper... ...

Dont think it will handle much tounge weight tho.

SOTSU!!
\\BF//