A-Piller Gage Replacements????

[Max Wedge]

Does anyone make a full A-piller gage pod Replacement-rather than just a skin. I would rather not cut holes in the origianl one and then screw on a skin. Any suggestions would be helpful--any at all.

Thanks
Semi

------------------
Y2K Black 3500 4x4 SLT+ Leather ETC/DGA DMF/DSA Luverne SST Bars
'64 Plymouth 426 III (Max Wedge)
'79 Chrysler 300 T-Tops NRA Member

 

[Guest00]

IS THAT YOUR FINAL ANSWER ???

Aaww you loose #ad


None that have seen the light of day here. .

We could bomb the sear, trigger group and bolt. Then you could drop the semi

[This message has been edited by JNutter (edited 04-17-2001). ]

 

[Max Wedge]

JNutter--done that once to a 10/22 #ad
Fun for a while but bolt was to fast (JAMs) and had to wait till mag was empty--50 went by quick when it didn't jam!

 

[EMDDIESEL]

You can mount Autometers pillar alone and not use it as a "skin". It is a tiny bit smaller then the factory one, but it will work. But, to secure it, you will have to put a screw in the top portion to hold it since there wont be any of those (WORTHLESS) spring clips.

 

[groundpounder]

A new OEM factory a pillar is not that much. Arcticat did an overlay with some type of glue and it turned out awesome. I personally seen his pillar and I will be doing mine the same why. Nice job Arcticat!!!!

------------------
99 Dodge 4x4 Quad Diesel NV241HD auto. K&N, 4" JRE, 5" chrome tip, matched 275 Bosch injectors, 2. 5" Skyjacker leveling kit, B. F. Goodrich Mud Terrains 35/12. 50-16. 5, Eagle 589's 16. 5x9. 75, silencer ring MIA. (more to come)

 

[Cooker]

I used 3M tape to attach my A-Pillar after another member recommended it to me. It fits much better than the "push pins" Autometer gives you and it looks much more original. (I did use a push pin, but it was only to help hold thing while I was getting everything lined up).

It is obviously still noticable at the edge toward the door and the lower portion, but it's acceptable IMO.

 

[Max Wedge]

How do th eoverlays look with the tweeter? I would think that the tweeter would be setting in to deep to look correct.

Thanks fo rall the info. so far. Just hate cutting up my baby.

 

[EMDDIESEL]

I have the version with the tweeter. It looks really good. the tweeter will be to the left of the lowest gauge. It uses the stock tweeter grill.

 

[DRT]

I used Geno's triple with the tweeter hole, as a replacement. A small screw in the top part and friction fit on the bottom---no problem. Paint the head of the screw the same color and you hardly notice it.

 

[oldiron]

Does anyone have the part # for the factory pillar cover w/o the tweeter? I want to use it under the autometer skin for some extra strength. Thanks

------------------
99 QC LWB Auto ETC 4x4 3. 54 gears, 265 tires, Lear cap, IAS shocks