Engine/Transmission (1998.5 - 2002) ? about twin combo

[Stroke This 24V]

Has anyone tried a Piers HX40 with a HT3B?



If so how is streetability?



How is the spool up?



Just wanting to get an answer

 

[J.R. Adkins]

You can get very fast spool up with that set up with the right housings.

 

[TxDieselKid]

Strokethis,



I have been thinking about that combo for a while. Let me know what happens.



Andrew

 

[Stroke This 24V]

I know someone that has great fabricating skills and I am hoping that he will hook me up with a good twin arrangement for cheap!

 

[Mark_Kendrick]

A twin setup with any turbo is going to SLIGHLY slower than the small turbo off the line.



after that the compounded multiplication of pressure begins and all bets are off. wastegating becomes paramount after about 30psi.



I have never heard of any PDR 40 breaking but be leary of over spooling a 40. they are very susceptable to breakage at high boost.



If I were to put a 40 on my truck it'd come from piers... I just wouldn't use a 40



you might think about a BHT3B. . bleed orafaced and supposedly has a 19cm or so housing vs a ~22 on the HT3B.



I use the HT3B on my twins and it works great with a HX35/12.



Later,

Mark

 

[J.R. Adkins]

Hey Mark!

Witch housing you are using on the ht3b?





J. R.

 

[HVAC]

Twins

You gonna put twins on your truck JR?

 

[Mark_Kendrick]

Re: Hey Mark!

Originally posted by J. R. Adkins

Witch housing you are using on the ht3b?





J. R.

I think the HT3B comes with a 21 or 22 . . It's hard to find solid info on them. I run the run of the mill HT3B... truck pro pn# 196800



I think if I decide to get a second turbo (I'd like to polish a set of turbos and tubes ) I may try to get Piers or the like to give it a little TLC. . a good balamceing and oil work never hurt anything



Besides Piers has a rep for longevity.



Later,

Mark

 

[J.R. Adkins]

They are allready on there HVAC.

 

[J.R. Adkins]

Mark,



Let me know what your back pressures are when you find out.

 

[Mark_Kendrick]

LOL. . I bought some stuff to hook up a gauge but haven't gotten it in yet.



Later,

Mark

 

[jwilliams3]

And they look damn good!



--Justin