ABS pipe where to get it??

[jwilliams3]

ABS is somewhat hard to find.

Generally most available plastic is PVC Sched. 40

 

[99Supercab]

I did this last week. I dropped mine down about 1-1 1/2" below the air dam. It is barly visable unless you`re really looking for it. I used PVC and then just painted it. You really have to cut your hole in the exact spot, or you`ll need another bend, I wasn`t smart enough to put another bend in mine, so I snipped off a small part of metal that mine was hitting and problem solved. I noticed no performance gains, but I have seen about a 25* drop in EGT`s. That`s enough improvement for me for a $25 mod.

 

[KBowar]

I did mine last night. I use a 4 inch pvc stool flange. 1 4" S$D coup. that just slipped in side the stool flange. Then 2 4" S&D 45's below the coup. and a 4" S&D 90 below them right behind the fog light. S&D fitting are lighter then sch. 40 so you don't have the weight on your air box. Paint them black can't see them.

 

[GECCO]

Can someone summarize this mod for me? I joined recently and don't have issue 50.



THX

G