Here I am

Engine/Transmission (1994 - 1998) ABS Wire

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff
Status
Not open for further replies.
I was traveling along a muddy dirt road the other day and my ABS, Brake and the Speedometer quit on the insterments. I new what it was because it has happened before. But this time the end that pluges in to the top of the rear axel ripped off before I could get stopped. Does anybody have any idea on how to fix, and maybe the cost.





















98 Dodge 2500, ex cab, green and silver, 115K miles
 
If its the end that attaches to the unit on the rear axle?



A good mopar parts guy should be able to show/print what wiring connectors and terminals are available, other have to be ordered with a partial complete wiring harness.



You might have to head for the bone yard with your diagonals/side cutters and find you some solder and heat shrink and put everything back together.



I'm not near a FSM for that model year, but I'm thinking its different for post 97 model year trucks?



I have some mopar part numbers if you'll send me a digital photo of the specific connector, my parts list might be a little old, but perhaps the numbers will superceed.





Good luck,



Andy

-- email address removed --
 
Last edited by a moderator:
Status
Not open for further replies.
Back
Top