Adjusting Turbo Boost

[kwoodson]

I have an 03 that i would like to raise the boost pressure on, problem is, don't know how. Can someone help me with this?

 

[ktb]

before i replaced mine i made some washers that went between the waste gate actuator and bracket it mounts to, i cut one side out so that i could just slide them in. If i remember right i gained about 3-4 psi but not sure it helped any ... that turbo is pretty much maxed out stock, my compressor wheel was rubbing the housing before 100,000 miles
i feel that the later turbos are a effective cheap upgrade

 

[cerberusiam]

Boost elbow in the WG boost refgerence line is the easiest. That makes it adjustable enough you can tune it a bit.

 

[Bob4x4]

I have an 03 that i would like to raise the boost pressure on, problem is, don't know how. Can someone help me with this?

If your truck is stock it won't help... ...

 

[kwoodson]

Fixing to shoot the fuel to it. I have a 97' with a 250 H. P. torque plate that will pull circles around the 03'. I would still be driving the 97, but at 600,000 miles it needs about 2 weeks worth of TLC. I don't have the time at this time to do the required repairs, so, I had to break out the 03, haven't drove this truck much since I purchased it in 07.