Aeroturbine Question

[GRudy]

FYI for everyone. I was doing some running around this morning and walked around the back of my truck to see my 5" polished stainless steel tip about draging on the ground. The tail pipe had come loose from the hanger and was just hanging there by the muffler. Earlier in this thread we were discussing haveing to cut off the tailpipe a bit to get things to line up. Well I took all I could without looseing clamping for the muffler but that pushed the hanger back out of the rubber. So, I took the tail pipe back down and heated the hanging rod with my torch and rebent it about 1" forward so that the rubber hanger would stay on the hanger rod. Took a few trys to get it right but it looks like I found the cure.