air cleaners types that fit homemade

[drives mopars]

whats a good filter for a open fit

thats going inside a homemade metal 2 sided box



that will fit upagainst or surraround the stock corners



one side will touch the radiator inside support the other under the fender on the side under the a/c thingy dryer?





still have stock tube

need one about 10'' or so cone also ok



bill

 

[philb4]

Air Filter

Try this for size... Baldwin PA2805 It's like a paint pail with a filter inside. Dia. 8 1/2" length 11" and a 3"od tube slides into the neck on the end and is secured with a hose clamp. The filter is shielded and the whole thing clamps to the fender. Cost about 35. 00

 

[ScottB]

I would like to see a picture of that thing!!!!

 

[drives mopars]

iam building some metal housings

iam making some 1 st gen air boxes

hope to have 1 at MM



look for me there

thanks for the #

 

[MDKram]

How about a BHAF?!?



#ad




I recently did this install in a 91. 5. I made an aluminum shield to prevent the filter from getting wet and the owner of the truck says it stays bone dry. The filter is tucked into the fender well so the install looks very clean and the stock intake hose can be used. An aluminum strap is used to secure the filter to the original filter mount.



Regards, Marc

 

[KMC]

Bill, post a pic here or send me one in an e-mail when you get a box done. I'd like to check it out.



Thanks, Ken

 

[drives mopars]

i looked at the baldwin

bw was ok for size of filter but dont need the plastic houseing



the alum stainless are in the works





they are being designed as we speak



i may have a prototype at MM



i plan to sell 1st gen and 2 nd gen too



i plan to get no $$$ from this only to help a friend



buy a dodge diesel







ill have options on finish grades too. no seams mirror finish too



the metal guy has won awards for his work





bill: