Alarm Horn Chirp

[Archive]

Ok guys. . how can I turn this horn chirp off when I set my alarm... Im putting in the Grover Air horns tomorrow... loud chirp if I don't turn it off...

------------------
1999 3500 Dually fully loaded w/leather Cobra CB ISS Pro gauges in a Dual POD, GearVendors Overdrive, PowerVision Mirrors, 4" exhaust, DDII's injectors, Exhaust Brake, tows an Alfa GOld 36'

 

[Archive]

Look in the owners manual, the instructions will be in there. I turned my horn chirp off the first day I got the truck.

 

[Archive]

You can always put in a switch. I assume that you are going to wire them in conjunction with your existing horns. If so just run the power lead from you stock horns into the cab of your truck to a switch and then from the switch back to your air horn solenoid. Then you can turn your air horns off and on whenever you want. That is what I did but I never turn them off. I like the Chirp!

------------------
WHITE OBSESSION" 99 Quad Cab, White, SLT, 4x4, 5-sp, 3:54's LSD, Raven cap (cab high), Rhino liner, Stainless Nerf Bars, Stainless Rocker Panels, Tow package, Pro-flap mud flaps with Stainless Cummins "C" add to rear flaps, Valentine One, Uniden PC78LTW CB, Hadley Bully Air Horns, Power Edge, Psychotty Air Induction, Braided SS Fuel Lines, 4" Jardine Exhaust (Love the deep throaty sound), 285/75R16 Cooper A/T's.

My 99 Dodge Cummins

Things to come;
Pyro, Boost and Fuel Pressure gauges, PE timing module and injectors.

NRA Life Member! (Need to protect our rights and FREEDOM!!)

 

[Archive]

My Grov is connected with the electric ones and is mega loud... however the Grover does not go off when I hit the alarm lock... . only the stock honks. I don't know why but I think the electric pulse is so short the solenoid does not have time to open?

 

[Archive]

If I'm not mistaken, I remember reading that there are two different length pulses that can be sent to the horns when arming the alarm (as well as none). For the life of me, I can't find out how to do the programming in either the owners manual or the factory service manual.

------------------
99 QC SB 4x4 Auto
Factory Ordered
Most Options

 

[Archive]

To disable the horn chirp (Taken from page 13 of my 2001 owners manual) :

1. Place the key in ignition and turn the key to the ON position (do not start engine)
2. Press and hold the UNLOCK button on the transmitter for four to ten seconds
3. While the UNLOCK button is pressed, press the LOCK button on the transmitter and then release both buttons
4. You will hear a single chime when programming is completed
5. To enable the feature again, follow the above steps[/list=a]
   
   I don't have the "alarm" I just have the remote keyless entry, so I don't know if we are talking about the same horn chirp.

 

[Archive]

KatDiesel... your right that does stop the chirping noise and you can program your self... thanks everyone

 

[Archive]

You can also put a relay in the horn line that only gets power when the switch is on. This will allow you to keep your horn chirp on arming the security system without the airhorn being sounded. I inititally disabled the horn chirp, but found my self always wondering if I did in fact arm the system. The down side is you do not have the use of the airhorn if the switch is off.

------------------
99 2500 QC 4X4 5sp / made in Mexico /
3. 54LSD 285 75X16 AR Atlas / Hadley airhorns ISSPRO guages/Hitchhiker 5er