2nd Gen Non-Engine/Transmission Alignment in Salt Lake City

[stownsend]

Hey, anybody from the Salt Lake area know of a good shop the get a front end alignment? Most of the shops I've called say their equipment won’t accommodate a quad cab with long bed.



Thanks for advice.



Steve

 

[Grizzly]

Whatever you do, DON'T go the a dealer, they will rip you a new one.

 

[TLarsen]

I had Jack's Tire and Oil here in Logan align my Club Cab long bed, I believe they have a shop in Orem.

 

[Missouri Mule]

The alignment shop you called probalby was thinking 4 wheel alignment instead 2.

Four wheel alignment is a rip off and should be the last option if rear tires are wearing wrong.

 

[RCook]

I've used Page Brake on 7th South 363-3844. They did a good job, but it was several years ago.

 

[MLee]

Alignment Specialist @ 972-1105 2141 w 2100 s If it has wheels they can align it. They have a flat floor, Most dealers there rack will not accomidate a long wheel base.

Marv.

 

[Silver_Ram]

I will second MLee for Alignment Specialist's. They are the bomb when it comes to alignments... ... .

 

[HeberRam]

I third Alignment specialist... Oo.

 

[AMikesell]

I will fourth alignment specialist. I had a ton of play in my steering before taking it in and when I started to drive it home it was like a new truck. They will show you the problem and then you can make the decision on what to do and they are not over priced. Andrew

 

[stownsend]

Thanks for the advice. I callled Alignment Specialist today and made an appointment based on all the positive feedback. I'll let them know what an impression they made.



Steve

 

[WAckerman]

I brought this thread back up because I wanted to get a little more info before I just assume that I need alignment.



My truck (in sig) is wearing the outer edge of the passenger side front tire off. The drivers side appears to be OK. What could be causing this? I just rolled over 52000 miles, and had it aligned by the dealer in American Fork in the spring of 08.



Thanks,

Wes

 

[DMcLeod]

WAckerman - you could try posting in the 3rd gen forum.