2nd Gen Non-Engine/Transmission alignment problem

[dflaugh]

I have an 02 3500 that has a bad right pull ever since I bought it 2 years ago. I just installed the track bar conversion. On my other truck-96 2500- Andy Redmond had sent me info on a properly done alignment,can not find any place that knows or does an alignment according to that info. I'm in southern Colo. and would like names and locations of where to get this done right. I would be willing to drive as far as Denver or Albuquerque. Thanks!

 

[CTD12V]

Hey dflaugh,



I'm not sure if these are the same specs as what Andy Redmond sent you, but here is what I saved off one of the threads on here a while back. I don't remember what thread it was.

Specifications (my personal settings for every Ram I align): all specs

below are in degrees.





Left Wheel Right Wheel

-------------- ----------------



Caster 3. 2 3. 5

Cross Caster -. 3



Camber -. 10 -. 10

Cross Camber 0. 0



Toe - standard specs, (maybe a little out if you tow a lot, they will

pull in as the front end lifts up).



Brent

ASE Certified

Gold Certified Chrysler tech

Hope these help. I went to get an alignment the other day and one of the eccentric bolts sheared off when the tech tried loosening it. He couldn't get the other one loose either. Now I'm waiting for the Dodge dealer to get the bolts in stock. Hopefully I can get the truck aligned next week.



CTD12V