Here I am

Engine/Transmission (1994 - 1998) Am I in trouble?

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Engine/Transmission (1994 - 1998) Timing in Cincinnati

Engine/Transmission (1998.5 - 2002) FP Gauge questions & problems

Status
Not open for further replies.
Kalaehina, I had a bad leak that turned out to be the vacuum pump to timing cover gasket. You might want to clean the engine off first and then see if you can tell were the oil is coming from. If the engine is warm when you clean it do not restart it until it has cooled. You could damage the injector bump if you don't

Bob
 
Originally posted by Bob V

Kalaehina, I had a bad leak that turned out to be the vacuum pump to timing cover gasket.



Bob, do you have the part # for that gasket? Where did you get it & how much was it?



Last time I fixed the vacuum pump leak I used a single-lip seal and separated the pumps without removing the vacuum pump from the engine- a real PITA. It's leaking again now.



I now have CPFF's seal and intend to pull the vacuum pump/ PS pump assembly off & do it right but I'll need the gasket you're referring to. TIA, Bill
 
Bill, sorry I am still looking for the #, but I think it was about $9. 00 at Cummins NW. If I find the part number I will post it later

Bob
 
Status
Not open for further replies.
Back
Top