Here I am

Engine/Transmission (1998.5 - 2002) Amsoil Dual Bypass Location

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff
Status
Not open for further replies.
Twins are going in soon and I need to find a new home for my Amsoil dual bypass system. I was thinking of mounting it on the passenger side frame rail about 1 foot forward of the rear leaf spring mount. Can't move it any farther forward due to my compressor tank being in the next best location. If I mounted it there the hoses would be over 12' long :eek: My concern is can the oil pump handle that additional distance?
 
Thanks for the PM Rick. Removing the passenger side battery and installing the filters in its place is a good option. A bit costly since I just replace both my batteries. I would have to get a high cranking amp replacement battery if I wound up going that route. I'm still wondering if the 12' long hoses would be a problem though???
 
Behind the bumper

I mounted a single bypass behind the bumper. Mounts nicely to the crossmember ... horizontally above the sway bar
 
what mess

No problem with the mess . . same pan that catches the oil at the drain plug can catch the oil at the filter. Unscrew filter enough to let canister drain then remove to change element. less mess than trying balance a canister full of oil



:eek:
 
BPonci said:
I mounted mine under the fan shroud on the crossmember. It really makes changing them a breeze.



That would be a great idea if some smart ??? didn't mount 24" of horn up there !!!! :-laf
 
Status
Not open for further replies.
Back
Top