2nd Gen Non-Engine/Transmission AN sizes

[SHobbs]

Ok I can't find my list or lost it either one. Looking for the AN sizes for 1) Supply to the VP44, 2) stock fuel filter housing in and out, 3) stock L. P in and out.



Thanks,

Scott

 

[DFerverda]

Try this.
https://www.speedwaymotors.com/images/charts/Sizing-FittingThread.gif
Hope it helps.
Dirk

I think -6=3/8 id
-8=1/2 id
-10=5/8 id hose
I used -8 for the lp to the vp.
This site has kits and very good hose, you can figure out your ff size exc from the kits.
Vulcan compound turbo components, FireBall injectors, DrawStraw™, Big Line Kits, VP silicone boot kits, gauge installation components, metric adapters & fittings, FASS, Quadzilla, Edge,AirDog, DTT Trans, ISSPRO, HTT Turbo, AFE, Veg pumps,  brackets,

 

[n7gxz]

If your looking for the thread pitch going into the listed items it is a 12mmx1. 5. Some will list it as a Webber carb fitting.



Kevin