Attention: TDR Forum Junkies 
I finally got around to taking care of the KDP. The hardest part was getting the fan nut loose. I purchased one of Harold's jigs. I was able to do the job without removing the fan shroud, catch tank, and washer jug. The pin did appear to be somewhat loose, kind of hard to tell how far out it was, probably about a 1/16 of an inch. I used a Milwaukee close quarters drill. It has a 55 degree angle instead of a 90 degree angle. It was tight, but it did fit. I have a jig with all the necessary items including several extra threaded plugs if anyone wants to use them. I am located in Northern Virginia.
I also installed a Luke's Link on the track bar last night. Getting ready to take it for a test drive. Truck was starting to get real squirrelly. I have one of Darren's steering brackets on order. Hope that gets here soon.
I also installed a Luke's Link on the track bar last night. Getting ready to take it for a test drive. Truck was starting to get real squirrelly. I have one of Darren's steering brackets on order. Hope that gets here soon.
