You guys are talking about mileage ... how about helping me with some better numbers.
For starters I'll tell you where I'm at (and why I'm asking).
For comparison purposes, I've been using a steady cruise on a flat road, with minimal wind, at a corrected 65 MPH, using odometer correction figures based on a 10 or 20 mile measurement, with the tank filled "right to the brim" before and after. I've tried to do this for at least 200 miles between fillups. This doesn't mean I'm going to run 65 MPH very often, but this is a speed I can run on the interstate without much interruption.
Both of my trucks have stock 180 injectors and delivery valves, and I'd like to upgrade them without hurting my fuel mileages.
The '97 will get just over 20 MPG unloaded. Sometimes as high as 20. 8
The
'97 with a large Lance camper will get about 13. 8 at 65 MPH, and will get just over 15 if I hold 55 MPH.
The '96 unloaded before the #5 plate and TC/VB would vary between 22. 8 and 23. 1
The '96 just got the #5 plate and TC/VB and I don't have any figures on it yet.
I played with the #5 plate in the '97, sliding it forward and backward until I wasn't getting noticeable smoke at very light throttle. When I first installed the #5 it was all the way forward and I had lots of real neat smoke, but the mileage suffered at least 2 or 3 MPG.
I'm trying to find the middle ground between lots of power and good mileage when I keep my foot out of it.
Can anybody tell where I'll end up with DDP injectors? They claim improved mileage.