Any 305 guys buying the Juice/Attitude?

[CLAYTON]

Mark Craig... can you put some pics of the mounts so we can see them?

 

[Mark Craig]

bugbldr,



Mail is delievered!



Mark @ DPPI

 

[Mark Craig]

A Pillar Attitude Mounts Pics

Mark Craig... can you put some pics of the mounts so we can see them?

Hopefully this will post I'm not internet expert etc.



Mark @ DPPI

 

[CLAYTON]

Do you have a pic of the over head mount?

 

[JVolpe]

Real world pic of pillar mount

Not an artist conception.

#ad

 

[CCaldwell]

Mark Craig, could you aslo send me the tdr price for 04 dodge juice/attitude and a-piller mount. Does the juice/attitude go along with the edge ez or are they two seperate systems?

 

[Scott Rosendahl]

p-Bar,



Mail has been delievered.



Also wanted to let you members know we have a new overhead mount for the Attitudes available. It's sort of like the overhead gauge mounts but has a molded location for the Attitude and angles it to the driver's eyes. Plus we have the A pillar mounts that are color matched and look great as well.



Mark @ DPPI

Mark,

Please post pics of the new overhead mount for the Attitude.

Thanks...

 

[SVazquez]

http://www.usdieselparts.com/moreinfo.cfm?Product_ID=177503



This is the mount that I ordered that is supposed to hit tomorrow. I don't know if this is actually what it looks like or not. The phone calls I made said that the mount is black . Pic sure looks "light taupe' to me. Guess I will find out!

By the way, thanks again Rip for the great price and quality of service for my Juice/Attitude.

Scott

 

[CLAYTON]

Here's the overhead mount

This is the pic from the link above... .



#ad




Where does it go exactly?

I don't know if this is actually what it looks like or not. The phone calls I made said that the mount is black . Pic sure looks "light taupe' to me.

If it does come black you can go to any place that installs guages and have them paint it the right color. That's what they do for a lot of the a-pillars.







.

 

[Mark Craig]

CLAYTON,



Yes that is it, and you are correct it is in black and you can psint it or not, your choice. It fits above the windshiled mounted rear view mirror, slips between the headliner and the steel of the roof and against the glass.

We have them and the A pillars which are molded in factory color material if you need them.



Mark @ DPPI

 

[Eliminator]

Just bought one, Edge Juice W/Attitude at the Street Rod Nationals in Louisville, KY.

Diesel Injection Service of Louisville,had them at their Booth, Show Special, 739. 00 plus 6% Tax.

www.dieselusa.com

502-3612531

Will be installed this week-end. Oo.

 

[Eliminator]

Bought the A Pillar mount for the 05 from Diesel Performance Parts, color matched the Pillar good and fit real nice. The plug comes out of the bottom hole and they have a new s/s screw that replaces the stock screw. It' s around $49. 00. Good next day service for me.

The over head mount leaves questions on running the cable from the Attitute to the harness in the engine compartment. The length and the ability to hide the cable for a clean install.

Just my 2 cents worth.

 

[bzingre]

Overhead Mount

That's my question too, is the control lead to the engine compartment long enough for the overhead winshield mount? I've got new Isspro gages installed and I want to keep them for fast review. Who's got the best price on the overhead mount?

 

[SVazquez]

I installed my overhead mount this afternoon. I was going to paint it but decided to leave it black since everything on my dash is black. I think it looks fine but if I decide I don't like it I'll just pull it out and paint it.



I was surprised to see that there is enough cable to mount it up above as long as you route it as per Edge's directions (through the door, not through the firewall). There was actually about 3" to spare. It went above the headliner, down the A-pillar and out the side just fine. Can't see any cable at all . I think it looks pretty sharp. The only thing that I might try and modify is that where the mount meets the headliner there is a gap of less that 1/8". Just enough of a gap to see sunlight through it. I'll post pics if anyone is interested.



Scott

 

[Mark Craig]

bzingre,



You can run it thru the firewall if you get the Juice extension cable that is available, it's three feet long and makes the overhead mount a breeze. Route the cable up the A pillar and above the padded headliner, it'll fall out a couple of times till the sun get it "memoriozed" in place then it'll stay for you.



Mark @ DPPI

 

[brown24]

What is the best price on the Edge Juice W/Attitude and pillar mount?

 

[JHardwick]

Okay, so far this is mostly about the Attitude mount.



I have a couple specific questions ... .....



1)If I keep my gages and skip the Attitude, do I get the same HP? I originally read the Attitude made/allowed more HP ... ... is this an '04. 5 and up thing?



2)Can the '03 Juice be stacked with the EZ, at first I heard it could not, and then I heard it could.



3)What kinda HP is the Juice rated at?



4)With an EZ?



Y'all know how long I've been waiting for this. I had my '03 in Feb,03 and EZ in Mar,03.



I hate codes, that skeered me form the TST. The Quad made no codes, but was pressure/timing. The Juice appears to make no codes, can I add pressure?

 

[SVazquez]

Okay, so far this is mostly about the Attitude mount.



I have a couple specific questions ... .....



1)If I keep my gages and skip the Attitude, do I get the same HP? I originally read the Attitude made/allowed more HP ... ... is this an '04. 5 and up thing?



The Juice by itself comes w/ a switch that only allows 3 choices. Can't tell youwhich 3 they are.



2)Can the '03 Juice be stacked with the EZ, at first I heard it could not, and then I heard it could.

I was advised that stacking w/ an EZ is NOT a good idea because for the '03's the Juice works all three. The 04. 5 and above does not.





3)What kinda HP is the Juice rated at?

The box has a sticker that claims 25 to 125 HP gains. The instructions claim 25 to 100 HP gains.



4)With an EZ?

See above.



Y'all know how long I've been waiting for this. I had my '03 in Feb,03 and EZ in Mar,03.



I hate codes, that skeered me form the TST. The Quad made no codes, but was pressure/timing. The Juice appears to make no codes, can I add pressure?

I would say if you are going to get the Juice, go ahead and get the Attitude

The Juice is not the "fastest" box out there. But for my needs, it suits me.

 

[Mark Craig]

What is the best price on the Edge Juice W/Attitude and pillar mount?

We have a TDR special on them as well as the mounts etc. Better pricing than what was mentioned in a post in this thread etc.



Mark @ DPPI

 

[Mark Craig]

JHardwick,



If you don't get the Attitude you lose the top HP level and only have a switch to control HP levels. Plus you lose a lot of the safety features for EGt control etc etc.



Mark @ DPPI