Engine/Transmission (1994 - 1998) Any of the KDP kits still around?

[Weatherly]

Just bought 97 Scotty motorhome (built on 97 3500 chassis) with 80k miles. Motor untouched, pulled radiator and thermostat to clean out (run hot). I have a 97 2500 that I got local (Houston, TX) TDRer put in a rivet to stop the KDP. Would like to do the same to the motorhome



Bobby

 

[DonTX]

Aw just sell it - to me! Can we get a photo of it, those are rare birds.

 

[Moose Truck]

Aw just sell it - to me! Can we get a photo of it, those are rare birds.

No no no!! Sell it to me!!! Oo.

 

[DonTX]

GET BACK IN LINE! I was first!

 

[WDaniels]

Bill Flemming from Montana had the one for the northwest for quite awhile. Unless someone took it over from him before he got banned, he still has it. To try to get a hold of it reach Mr. St. Laurant or Mr. Patton to find out his address

WD

 

[Forrest Nearing]

Cummins sells the tab washer, or you can make one out of a fender washer and a grinder (that's how I do mine)



new front seal from Cummins and a tube of silicone for the front cover to housing seal.

 

[Bob V]

Cummins sells the tab washer, or you can make one out of a fender washer and a grinder (that's how I do mine)



new front seal from Cummins and a tube of silicone for the front cover to housing seal.

I agree with Forrest. TAB IT. doesn't take much longer and you can check the bolts behind the cover.

 

[dieselshadow]

https://www.turbodieselregister.com...ransmission-faq/52871-shops-have-kdp-jig.html

 

[bigdaddydieseldan]

I recommend the tst kdp kit it has excellent instructions along with pictures and a tool list

 

[WilliamJones]

I also recommend the TST Kit Here is a link to TST TST Products, Inc. and a link to the PDF file on the installation http://www.tstproducts.com/DowelPina.pdf

 

[tp0d]

The NorthEast KDP Jig kit currently is inactive. I will PM you for further information. .

-j