Off Roading Any one running a Kore pace kit

[BKenny]

Just woundering i was looking into leveling my truck so i can run 315s and tame these 4:10s. They have frount leveling kit or you can get the pace kit that has front leveling springs a rear spring pack that replaces the overloads and shocks. Looks like a good set up

 

[Yo Hoot]

I ordered the Leveling kit last week. Should be here soon. It's spings and two Bilstein 5100 front shocks. Prices are going up by the end of the year if they haven't already.



Right now it's $350 for the above kit.



Kent also recomended new front bump stops. ($50 pair)



I also ordered rear shocks from him seperately. ($150)



Ended up costing me $600 shipped for all of it.



The other kits add rear spring packs and/or remote resevior FOX shox but prices really go up from here.

 

[BKenny]

Yeah,I looked at it and called them yesterday and the frount only leveling kit was $500. 00 looked like it had springs,shocks and bumpstops. Pace kit incuded the frount leveling kit plus rear shocks and spring pack that replaces the overload spring for $1000. 00. My trucks preveous owner had a camper so this thing has the camper packedge springs and he added Firstone air bags to it pluss rancho shocks. It rides like a ton off bricks they say the rear spring pack will help soften up the ride It will be cool to se how it rides hope to see it on your rig pretty soon

 

[desertbull]

Carli Suspension installed the KORE Performance RACE system yesterday in my truck... I posted under the general discussion area... and all I got to say is ...



It rocks! Oo. Oo. Oo. Oo. Oo.



Desertbull

 

[millrat]

Got about 1/2 hr hard drivin on my Kore chase susp(3-5 hr install,my a**). So far its awsome. Cant wait till daylight to really try it out.

 

[MNielsen]

millrat,

Any pics?? Also, how long did it really take?

 

[millrat]

Will try to post pics when I get 315's put on (Mon or Tues). The front came up a bit(maybe 1 1/2"),so theres not a lot that happens visually,but its a totally different truck ride wise. Kent's warning makes more sense now. It took me about 8 hrs ,but if you had help and read instructions beforehand you could cut that time quite a bit. This was also my first install so thats gonna eat up time as well. At work we use Campbell's Rule for time allotment-how long you think it should take X2,then change to the next increment of time (1hr-2 days)

 

[millrat]

I can't figure out how to get pictures on here,but with the 315's it looks as good as it rides (awesome!!!).