Anybody used Herculiner.....

[Got Smoke?]

on the beds of they're CTD's?? Just curious. When I bought my CTD it had the drop in bed liner, and I'm about to remove that. I was planning on just putting in a heavy duty rubber mat, but when I learned they cost around $65 before tax I thought twice. Then I saw a add for herculiner in one of my 4x4 mags the other night, and wondered how good it actually is. When I first heard about the stuff I thought it was a joke, but I've heard some good things about it.



Just wondering if any of you guys have had any success with the stuff?

 

[Mallory]

I have a drop in liner also, and used Herculiner on my side rails and in a few spots under the liner that where rubing the paint. I was so impressed that I used the same gallon can on the floor of my jeep. Just follow the instructions on the can. one nice thing about the stuff is the more coates you put on the thicker the liner gets and you can put additional coats on long after the first coat. (months)

 

[Boldt's Wagon]

A guide for installation:



http://www.explorerforum.com/forums/showthread.php?threadid=18595&pagenumber=1

 

[sdalton]

Remember a while back, the guy who incorrectly installed the Herculiner and got some on his Hootis?? Can someone fine the link?? I think it might have originated on the Ford site. This was the funniest thing I ever read.

 

[Kalaehina]

The good thing about Herculiner is that if you do throw something in your bed that actually gouges out a piece you can just go over it again and its all good. I've had it for a year now and I throw anything in my bed and I have gone through it but I just patched it up and went on my way. I also lined my bed toolbox, it helped keep stuff from sliding around and quieted it down a bit.

 

[The Sequel]

As I recall it was a Ford Explorer website. I don't have the link. Surely somebody saved it. It was hilarious reading.

 

[Cummins Corvette]

Originally posted by Boldt's Wagon

A guide for installation:



http://www.explorerforum.com/forums/showthread.php?threadid=18595&pagenumber=1

This is the link you guys are talking about. OMG... ... ... ... ..... LMFAO!!!!!!!!!!!!!!!!!!! WOW!! I wonder if that is (really) a joke? wow... ... .

 

[Got Smoke?]

How did he get it off? :--) :--) :--) :--)





I sure as hell wasn't reading 12 pages of post's at 20 till 2AM

 

[BGDUMMY]

I have not put it on my bed, but I did coat my nerf bars and it his holding up well, with the exception of the aluminum step plates. It is coming off those, but not the steel bars themselves.

 

[shendren]

just have someone spray in a bed liner. you won't be disappointed. i have a husky. awsome. i have a piece of plywood over it to make the bottom a little slicker.

 

[Got Smoke?]

Originally posted by shendren

just have someone spray in a bed liner

That's the problem Scott, I don't have that kind of money!