Here I am

Engine/Transmission (1998.5 - 2002) Anyone dyno this set up?

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Engine/Transmission (1998.5 - 2002) PS Pump Leak

2nd Gen Non-Engine/Transmission front rotor surface

Status
Not open for further replies.
My truck is a 2001 ho 6 speed, and my mods are/will be dd stage 2 injectors, tst powermax 3, 4 inch short muflerless exhaust, pdr hx40-16 housing, and bhaf. THose are the definite mods with a possible timing box or catcher.
 
That sounds about right. I would say that without a timing box of any kind your numbers would be considerably lower and EGTs would be higher than with an EZ or comp.
 
So if i add a timing box, I should be well over 425 horses if Turbo Tweaker is at 425 with out a turbo. Correct? Maybe I might hit 450?
 
what size turbo? that is the question. like a DZ 40/35 might net about 15-25 hp maybe or even a Hx 40 would be a nice upgrade.



The Fat Kid

Andy
 
You will need bigger injectors than DD2's. I had a B-1, Edge comp, and DD supermentals on my 01 truck and it did 451.



Doug
 
Originally posted by EBung

I did 305hp and 1398tq on a mustang dyno with no box just boost fooler.



1398tq... ... Something is not right with that number. Your TQ number should have been around 600 or so.



Doug
 
Yeah I know but thats what was on the printout. I think the torque is because he had me start my pull at 8mph and go all the way to 80mph!And what I got was peaks. Like with the pull in first gear the torque multiplication is alot more. Its all I have to go off of at this point. But get this; he dynos all trucks the same way and he dynoed a 04 Powerstroke with a big woof turbo,fueling box,intake,banks intercooler and propane!!He told me that truck made 260hp and 850lb so atleast its measuring the greater and the lesser! :p
 
Status
Not open for further replies.
Back
Top