Here I am

anyone have a snowplow on lifted truck?

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Fuel Pressure gauge light pwr source

A Fix For Loose Mirrors?

Status
Not open for further replies.
I was looking at updating my truck and have my eye on an 04 with a 4" suspension lift. The truck I would be getting rid of has my snowplow mounted on it. I would like to mount the plow on the 04, but wondering if the truck would sit to tall for the plow to work. May just need to install a longer lift chain. Thanks for any help.
 
If you go to high you will have trouble with it turned to the right of left, or if it is a v plow you will not have it sitting flat in v or scoop.
 
I have 3" Lorenz IR coils. If you look at the angle of the moldboard you can see it looks like it is tripping. I have had to add two springs for a total of 6. I also am adding two more shocks to dampen the recoil. I have no problem turning the plow left or right.



#ad
 
Status
Not open for further replies.
Back
Top