Anyone Have Grille Inserts On Their Rig?

[Archive]

Evan, I put a set of the plastic Lund inserts w/holes and I haven't had any problems with them contact Summit

 

[Archive]

rotohead, how is the fit, and were they pretty easy to install? Do they bolt on in front of the honeycomb? Good looking truck!!
Larry

------------------
Y2K 3500 QC,SLT,4X2,White, 6spd,3. 54 lsd,Banks Stinger +,Pacbrake,Pilar mt. EGT & Boost,Amsoil air filter,all amsoil lube w/BMK-15 filter system,MagTec rear cover,putco boss rbs. w/ rear ext. &flaps,20K reese,100 gal. aux. fuel,fold up T cover,5K airlift bags w/comp. ,ranger 2950 cb pushing palomar 225 amp,phantom radar det.

[This message has been edited by yogibear (edited 12-13-2000). ]

 

[Archive]

Steel Horse inserts here, got them at GI Joes

 

[Archive]

I have Stull's SS grill & bumper inserts on my truck. I like it because it's a stainless steel mesh that stops most bugs and all rocks from getting in. You remove the honeycomb inserts the factory put in and replace them with these. I bought them online through Summit racing for approx. $165 for the set (here's a link http://store. summitracing.com/product. asp?ssid=28D4G7PIEYPKFPC FNBI6ICOWF5&p=A6ED2A00-3612-11D3-949D-080009FC5B5F ). The only thing I did different with mine is that I mounted the bumper inserts on the outside of the bumper instead of on the inside as they instruct you to. They fit perfectly flush if you mount them from the outside and are less likely to go through your radiator! Here's a pic of the front end of my truck.

#ad




------------------
-Steve St. Laurent - President of the Great Lakes TDR
'98 QC LB (CMNSPWR), 4x4, ISB, 5sp, 4. 10 LSD, TST Powermax, 275hp RV injectors, SW fuel pressure gauge, BD exhaust brake, Isspro turbo temp monitor, front Draw-Tite receiver, rear Draw-Tite class V receiver, BFG 285/75R16 AT KO's, (all the common stuff clipped)

 

[Archive]

The Steel Horse product installed very easy and the fit is very good. You will need to remove all the plastic honeycomb crap and the lower plastic bumper inserts. Then spend some time aligning things up before making the final attachments. A one hour "upgrade" that makes a better looking truck and I think improves airflow. More pics at: www.xmission.com/~rotohead/more_pics.htm

 

[Archive]

rotohead, it looks like the bumper inserts cover your OEM foglights. Do they make a diff. insert for the lights?
Larry

 

[Archive]

Here is a pic of Doug Hofeldts truck w/Steel Horse grille. Gives the truck a whole new look
#ad