Attention: TDR Forum Junkies 
I have this pickup sold now this post can be removed.
I have a 1993 250 2 wheel drive pickup extended cab with no engine or transmission (it was a Cummins and a 5 speed). If anyone is needing any parts and would like to buy something or all of thie pickup let me know. If you want the whole thing I can help load it on a trailer. It is located SE North Dakota. The guy that I bought it from said it had a Dana 80 rearend, not sure what gear ratio, but I could look. the PCM is still in there. all the metel on the passenger side looks to be straight, the drivewrs side fender and box side are a littel beat up. Mostly the only rust is on the rocker panel under the doors. All the glass seems good, I haven't looked over the windshield with a fine tooth comb, but there isn't any cracks anyhow. Any sensors out of the engine, and any wiring harnesses, anything let me know and I will see if I can part with them, I am not using much of the parts actually from the pickup. I drive the pickup about 200 miles, and it drove good, handled well, I thought, but I have never drove a 1st gen Dodge before. I can take some pictures if there is interest, and if someone can tell me how to make sure the rearend is a Dana 80 let me know and I can check that too. I thought I would let you guys have the first crack at it, I will probably put it on ebay eventually.
Located in SE North Dakota.
I have a 1993 250 2 wheel drive pickup extended cab with no engine or transmission (it was a Cummins and a 5 speed). If anyone is needing any parts and would like to buy something or all of thie pickup let me know. If you want the whole thing I can help load it on a trailer. It is located SE North Dakota. The guy that I bought it from said it had a Dana 80 rearend, not sure what gear ratio, but I could look. the PCM is still in there. all the metel on the passenger side looks to be straight, the drivewrs side fender and box side are a littel beat up. Mostly the only rust is on the rocker panel under the doors. All the glass seems good, I haven't looked over the windshield with a fine tooth comb, but there isn't any cracks anyhow. Any sensors out of the engine, and any wiring harnesses, anything let me know and I will see if I can part with them, I am not using much of the parts actually from the pickup. I drive the pickup about 200 miles, and it drove good, handled well, I thought, but I have never drove a 1st gen Dodge before. I can take some pictures if there is interest, and if someone can tell me how to make sure the rearend is a Dana 80 let me know and I can check that too. I thought I would let you guys have the first crack at it, I will probably put it on ebay eventually.
Located in SE North Dakota.
Last edited:
but the "Lord hates a coward" so I proceeded. Couldn't find anything not working and I let it idle with the A/C on for about an hour and the alternator kept charging. The real test will be tomorrow during the day (supposed to reach 100) but I remain optimistic. Oo.
