Anyone running 37" MTR's with NO lift??

[TexBamBam]

Just got the new truck and have the 37" MTR's from the old truck. Wondering if I can run them without the lift.

 

[ECappleman]

Doubt it since 35s rub.

 

[Coolslice]

I've asked this before to a certain guy who should know, but he refused to answer me for whatever reason. :-laf



If some say 37's will clear w/ no lift, could I run my 35" Toyos on the Kore/Welds without having to have the leveling kit? I already have it on, but I would like to take it off if possible. I know people run the BFG 315's, but I have not heard of anyone running the Toyos w/out a lift.

 

[TexBamBam]

I have run the 315's without a lift but got the death wobble, I lifted my old truck and then put on the 37" MTR's and they rubbed the arms but about the same as the 315's but now they rubbed on both sides. I might just try it... and let all ya'll (that plural of ya'll in Texas) know.

 

[MickeyMiller]

I run 315's without a leveling kit... slight rubbing on the lower arms on both sides but not heavy contact. Just looking at the wheel openings, you might fit 37's with fender trimming, and possibly a set of those +1/2 inch longer control arms.

 

[Duck]

My buddy used to have the 37" MTR's on his truck with 17X9 wheels. He had a 3" leveling kit and they still rubbed a lil bit at full lock.

There you go

 

[TexBamBam]

I just wonder... if the fenders will rub... not concerned with the arms... they always did rub even with the lift.