Anyone running VA3.2 with Edge EZ?

[CookJ]

After speaking with the VA tech, I believe I am going to purchase the 3. 2. Although the soon to be out C5 looks very promising, I'm going to see how well this box works before upgrading. Anyone running the VA3. 2/EZ stack? If so, what are your thoughts. The tech says I should be impressed with this set up. TIA

 

[CookJ]

No one running this stack or care to comment?

 

[J_Da_Fox]

I'm currently playing with it and it looks very promising. A turbo upgrade is a must. The vA gets extremely hot extremely quickly. The vA by itself pulling hard in the low end, but doesnt have much up top. With the Ez stacked it pulls very hard all the way through. I'm very impressed, but like I said, it gets hot quick.

 

[CookJ]

Your'e right about the hot temps. I've been running the stack for a few weeks now and feel they are manageable with the EZ set on Level 2 and the VA at mid-power. With the VA on its higher setting, I can reach 1500 very quickly. Not sure if it's fuel related or transmission (or combination), but I get some hesitation (and/or shuttering) with the VA turned up. Have you experienced this? TIA

 

[J_Da_Fox]

I'm not sure about your truck, but mine is an 04. 5... . the program i have is for the 03-04. The guys at vA said that sometimes the box overfuels these trucks and needs its oqwn program. I'd call Don and he'd make it right for you. I just havent got around to sending the box in.

 

[CookJ]

If it is an overfueling situation, wouldn't I see smoke?

 

[J_Da_Fox]

Excuse my poor interpreting skills. It wasn't overfueling but fueling too fast that causes the hiccup. You are right about seeing smoke if overfueling... . My bad.....

 

[CookJ]

thanks, I'll give Don a shout.