April 20th, CT, NE WRENCH...WRENCH...WRENCH

[ToolManTimTaylor]

Wait a sec ..... How 'bout a raffle with hole sizes that range from 1/8th inch up to a grand winning 2" holesaw!

first 10 people draw from a hat to pick their hole size

 

[HEYBOSS]

Do we have to use a hole saw or can other tools be used to open holes? I'm pretty good at opening holes with a smoke wrench but it may burn the head liner!!!!

 

[HEYBOSS]

Originally posted by TORQUE THIS

HEYBOSS Your mail-box is full. Tried to send a PM

Sorry! It's now officially empty.

 

[Hammer]

How about a reallY BIG drill for the cab lights???,,We'll only drill a few holes,TRUST ME!!!,,Fred,I'll have to bring the heavy sunglasses if your coming and my ear plugs too,LOL,,FLA,SHEESH,Toolman Thats still only a short trip come on now,,Anything less than running the west coast is just a easy ride,,I'll also bring that BOMBed coffee cup for your wife to fred,just do not blame me if she looks like Ricochet Rabbit after she empties it from all the coffee and caffiene... ...

 

[HoleshotHolset]

Heck, it's only 8. 5hrs from Gardner, MA - New Kensington, PA..... been there, done that. We'd love to have you..... and I can help defend you when they start slamming on your accent.



Matt

 

[Wheaties]

There's western style hole drilling... lessee here, do you need a 22, 35, or 45 caliber hole? Oh I see it's metric, how about 9mm?



Then there's the Toolman Testosterone technique. Anyone got a well drilling rig? "Back 'em up... back 'em up... "



"Beep... beep... beep... "



Screw on that new tungsten bit, we gotta hole to drill in this here Dodge!

 

[HoleshotHolset]

That method is similar to using a 105mm zoom lens for doing a colonoscopy (sp?... I'm not in med school. ).



Get out that oxy-acetylene torch and light some birthday cake candles. You'll be lucky to even have any wick left.....



Matt -

 

[HEYBOSS]

Dam all the holes you guys are drilling on this guys roof I wonder if it would be easier to just cut off the top and make it a convertible CTD. Oo. Oo. and if it is metric I have a metric saw zall



Hammer you better bring your BOMbed sun glasses and definitely your ear plugs.

 

[HEYBOSS]

Change of plans

OK guys; looks like we are going to need to drill some



rectangular holes



Any body has a rectangular drill?:--)

 

[TORQUE THIS]

Left or right handed drill bits

 

[HoleshotHolset]

Just sharpen a point on a screw extractor (EZ-out)... . there's your left-handed drill.



Matt

 

[HEYBOSS]

Originally posted by TORQUE THIS

Left or right handed drill bits

Well, I think if we can get them both we might be better off,

just in case!

 

[Wheaties]

It just so happens that I do(have a square drill bit). . or to be exact, my Dad does. Unfortunately, it's designed for wood. Don't they make a stamp and anvil type tool for sheet metal (and headliner)? Couldn't we fake it with a fine blade in a sawzall?



How about we skip holes in the roof entirely, and just run exterior grade conduit up and across the roof--we could just glue the lights on

 

[HEYBOSS]

Originally posted by HoleshotHolset

Just sharpen a point on a screw extractor (EZ-out)... . there's your left-handed drill.



Matt

If you're going the EZ-out you mind as well go with the Comp-out

 

[TORQUE THIS]

My drill only goes forward, I have to unplug and flip it around so it goes in reverse:{

 

[Wheaties]

If you drill in reverse, does it fill the hole?

 

[TORQUE THIS]

That's right, if ya make a mistake, throw it in reverse and you won't know the difference.

 

[HoleshotHolset]

I gotta re-sharpen all of my drills with the "Edge-EZ".....

My power drill runs on 120 - "VA" ...



Matt

 

[TORQUE THIS]

I'm not getting the TORQUE I used to get from my drill. The clutch is slipping, can't keep it on power level 5 anymore

 

[RottnDogue]

I don't understand? I Cut it three times... and it's still too short... . :{ :{ :{