ATS 3-piece manifold

[gwalloch]

I found the ATS 3-piece manifold for $552. 00 plus shipping. Has anybody found a better price? I read some other threads talking about Mr. Bob's Distributing. Anybody have the number?

 

[illflem]

Piers has them for $460 http://www.piersdiesel.com/

 

[gwalloch]

Thanks Illflem. I'll give Piers a try. Where's the best place to fish up your way? Flyfish that is. I have the driftboat and so forth.

 

[24V-DSL]

www.mrbobsdistributing.com

 

[overfueled]

Hold on to your money. You could find that in a month or so that BD could be selling them cheeper. Just between you and me. OverFueled

 

[illflem]

Originally posted by gwalloch

Where's the best place to fish up your way? Flyfish that is. I have the driftboat and so forth.

Man, that's a tuff one since there are so many good spots. Rock Creek the Blackfoot and Big Hole rivers are all close to me and great.

 

[alaskagrizz]

lower price on ATS 3 piece manifold

I finally got Mr. Bob to answer email request on price (it took awhile). $399 for uncoated ATS 3 piece, not including shipping. I am planning to grab one for that price, unless anyone knows of a better price.

 

[Bill_L]

that is cheap. I don't think that anyone will beat it.



I got mine from Piers but I also got mine coated so there was a bit of difference in price.



Bill

 

[Proram]

Call ADT and talk to doug... you will get MUCH better price than 552. 00!



Scott



Advanced Diesel Technology 1-800- 876-1632

1-724-335-6167



Not affilated in any way... just a VERY happy customer!

 

[Mad Bomber]

ATS

I just got the 3 piece ATS on my truck. I paid $400 and $20. for shipping,from Rip Rook on nwbombers.com Thanx Eric

 

[Chipstien]

How are you liking that manifold Eric?

 

[GBerry]

hey Eric

how ya likin the manifold?? have ya retorqued the bolts yet??

hehe hows the studs doin?

Guy

 

[TomGolden]

Just curious, what are these running with coating? Is it Jet-Hot, ceramic, or what sort of coating?



Thanks,

Tom

 

[BillGotthelf]

Most places charge around $120 for the ceramic coating. We coat all the headers on our Hot Rods also. Coating will stand up to 1300 degrees (metal temp not egt). I had mine done thru Piers before they shipped to me. The satin black looks alot better than the rust color you get after a few months.

 

[dsherman]

Got mine from Mr Bobs for $399. and he paid for shipping.

His # is 877-543-7563 he told me not much longer at this price. Best price any where.

 

[JohnE]

Is it necessary to coat the exhaust manifold on a diesel?



I'm still running the stock cast iron exhaust and it is in very good external condition. The low temperature Cummins paint is long burned off, but no significant oxidation (rust) buildup.

You cannot say the same about a gasser exhaust around here.

 

[HEMI®Dart]

Originally posted by JohnE

Is it necessary to coat the exhaust manifold on a diesel?



I'm still running the stock cast iron exhaust and it is in very good external condition. The low temperature Cummins paint is long burned off, but no significant oxidation (rust) buildup.

You cannot say the same about a gasser exhaust around here.

No, but If you are buying a new one most guys would get it done.



Benefits:



THERMAL BARRIER PROPERTIES REDUCE RADIANT TEMPERATURE



HIGH ABRASION RESISTANCE



INCREASED GAS VELOCITIES (Could help spool-up)



REDUCED UNDER HOOD TEMPERATURES



LOOKS GREAT



In a nutshell, it's helping to keep the heat in the manifold where it belongs to benefit the turbo.



My 2 Cents

 

[illflem]

Does drilling and tapping for a pyro tend to chip the coating?

Should it be drilled and tapped before coating?

 

[jrobinson2]

From the picture on the their website it appears to have a boss already drilled and tapped

http://www.atsturbo.com/products/productdetail.php3?prod=9

Jared

 

[24V-DSL]

illflem....

Mine was drilled and tapped after the ceramic coating. No problems.



Mine was coated here... . www.performancecoatings.com



I think Piers still has them done here, as well.