Engine/Transmission (1994 - 1998) ATS Arc Flow

[PKemp]

Does anyone have any experience with the ATS Arc Flow intake manifolds on the early model 12 valves? (1995 - 3500)



Does it come off the engine at 90 degrees or like the original, angles towards the front?



If it comes off at 90 degrees I believe it will run smack into the Power Brake Master cylinder and plumbing... ...



Anyone out there seen one???

 

[td343]

Sorry, I cant give you any help... . but,,,,,,, How do you like your 370's. I just ordered a set. Thanks.

 

[Dr.Bob]

I didn't have any problems.

 

[PKemp]

Dr Bob: Does the intake interfere with the brake or power steering plumbing at all? I am concerned... ...



td343: The 370s haze at idle but there worth the extra punch. The big delivery valves also feed them well. The stock hx-35 is on the edge of not being big enough so I just ordered an ATS pulse exhaust manifold to go with my 4" straight thru exhaust to help with the exhaust temps and a stage 2 AFE megacannon for the intake as well as the ATS Arc flow intake to help with the breathing. I was having problems with the BHAF so gave up on that. This will bring the hx-35 to its limits and I still have the temps under control at WOT. Twins are on the horizon if I can get those lottery numbers right.

 

[GOlsen]

I know mine isn't as early as yours, but I didn't have a problem with clearances when I put my arc-flow on.

 

[Dr.Bob]

My only problem was threading the dipstick over the top, but it was plastic and it bent just fine.

 

[BTilson317]

Arc Flow's are kick***** i'm likin the looks and everything about mine, no clearance issues man, just a little higher i believe. I noticed better response and faster spool out of my 96. you'll like it get one...

 

[CBeeman]

Mine fit just fine and looks awesome!!

 

[6naline01]

I can not give dyno info just towing performance and I really notice a difference plus gauge acsess. Mike aka 6naline01