Here I am

ats exhaust

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

fuel filter changing

Is 7 too high for my Aluminum reading in oil report?

Status
Not open for further replies.
hey guys thinking about buying a ats pulseflow exhaust manifold, what are your thought and is it worth the $

________________________________________________ 04. 5 dually Kelderman air ride afe sps62 ddp 50 hp inj. smarty

straight pipe:
 
They are great units, but spendy. I have heard of them dropping egts slightly, but he big deal is they don't crack as easily as the stock piece.
 
I installed one on mine and the stock one looks pitiful in comparison. I did it for the pre-tapped pyro and the fact I tow heavy and wanted it for the reliability and better heat absorbtion. Do it for reliability and not for a huge power gain. Rather inexpensive upgrade to further bullet proof the cummins and replace the weak DC part the was installed just to get it out the door. Expect around a 50 degree drop in EGT's.
 
With my Bullydog, it's hard to distinguish just how much throttle response or turbo lag it may have helped with. It wasn't like it added so much I was like "WOW, what a difference". It's a hard one to measure unless I had a stock feel, then installed it afterwards. I noticed more low end pulling power with the banks intercooler and EGT's dropped 150-200 degrees.
 
Status
Not open for further replies.
Back
Top