Here I am

B&W Turnover-ball Gooseneck Hitch and Companion 5th Wheel Hitch for 2500/3500

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Carli Full Leaf Springs

97 Dodge Ram 4x4 Cummins Clean Rust Free Truck

Status
Not open for further replies.

petersonj

TDR MEMBER
Selling both a B&W Turnover-ball Gooseneck Hitch Model 1303R and Companion 5th Wheel RV Hitch Model: RVK3000. The turnover-ball was installed on the truck for years, but only used once for about 4 hours, then never used again. The 5th Wheel Companion hitch was also only used for 4 hours then removed and stored. Both are in excellent condition.

$500.00 buys both.

The Companion is a 5th wheel RV hitch that is unlike most conventional fifth wheel hitches in production today. Many systems will use an in bed rail system in order to fasten the hitch to the truck, which can be a great inconvenience and unwieldy setup. The B & W Companion hitch is actually an accessory that will use a Turnoverball Gooseneck Hitch as a mounting system. This allows for convenience and stability, allowing the hitch to be easily removed from the bed while only creating a 4" hole in the bed of the vehicle for the
gooseneck.


Installation could not be easier. The companion comes in two boxes, one with the base, and
one with the couple. There are 8 bolts, one post, and two u-bolts involved in
the installation. It can normally be done in under 10 minutes.

Features 18,000 GTW
4,500 VTW
Easily convert from a hitch to a level bed
Requires no mounting rails to secure the hitch to the truck bed
Vibration dampening polyurethane bushings provide a quiet, rattle-free towing experience
Cam action latching handle offers effortless hook up and release, even under pressure
Full 1 1/8" wrap around locking jaws for a worry free connection and a smooth tow
Fully articulating head allowing front to back and side to side pivoting
Patented hydraulic dampener permitting a controlled 7 degree side to side tilt.
Three vertical adjustments from 14.75 inches to 16.75 inches
Three positions giving you four inches of horizontal adjustment
Rugged wide stance engineered for improved stability and strength
Powder coated for a nice looking, durable, long lasting finish
All components manufactured in the U.S.A.


B&W Hitch.png
Hitch 1.jpg
Hitch.jpg
Hitch 2.jpg
Hitch 3.jpg
Hitch Hardware.jpg
Hitch Hardware 1.jpg


B&W Hitch.png


Hitch 1.jpg


Hitch.jpg


Hitch 2.jpg


Hitch 3.jpg


Hitch Hardware.jpg


Hitch Hardware 1.jpg
 
Status
Not open for further replies.
Back
Top