2nd Gen Non-Engine/Transmission ball joint replacement

[JamesSimpson]

I need to knowexactly what size sockets I will need for the following...



AXLE NUT



caliper bracket bolts..... I think its just a plain ol 12pt

hub bolts



Thanks

James



The whole search section of this forum is not working for me for some reason.

 

[JamesSimpson]

OH almost for got. Is $515 a good price to have the upper and lower ball joints replaced on the left side? I may or may not have time to do this myself and dont wanna get raped.

 

[supeerman4422]

i bought all four ball joints and hubs for both sides for 568. 00... i did them myself though. . it was a PITA takes alot of patience



-Tom

 

[DThelen]

sounds like a raping to me



don't know what it cost. I just had my right side apart today because i thought i had a bad lower. Turns out somebody didn't tight the nut up all the way. Got lucking it's didn't destrory the front axle. wasn't tobad of job. to about hour and half, but i didn't have to press the joint's apart.





The lower ball joint was 66 dollars for a moog.

 

[JamesSimpson]

Wow 568 for all four. I have seen a kit at quad4x4 for 199 and 299 if you get the BJP tool with it.



What size it the Jesus nut on the hub?