2nd Gen Non-Engine/Transmission Banjo replacement tips, Please

[JPLB22]

I have already replaced the banjo's on the out side of the LP, the inlet to the filter, and the inlet to VP44. Now I would like to replace the one on the bottom of filter ( out ) and the one on the inlet of the LP.



The one on the inlet to the LP seems simple to reach from above. But the one on the bottom of the filter looks to be a little tougher. Would it be easiest to remove the wheel well cover and go through there, or what ?? I can reach under the filter from above and feel the bolt but can not see what I am doing.



Any tips please, TIA



Jeff

 

[kaptn]

I did a friends from underneath the truck. Wear safety glasses.