Engine/Transmission (1998.5 - 2002) Banks defueling

[roller1000]

The ottomind box I have in my 01 auto defuels a little when its shifting. This can be felt when I am getting on it hard (unloaded). This , if I remember right is part of the system for the ottomind. can I get by this by putting in a boost fooler inline with the map. the ottomind is hooked up here also. I plan on putting the j-hook on my turbo also at a later date. thanks

 

[BDaugherty]

I'm assuming you have an auto, right? The ottomind has a wire that runs to the PCM to detect the T/C lock signal. All you have to do is disconnect that wire. It should be easy to spot as it will be the only non factory wire going to the PCM which is on the passenger side firewall behind the airbox. If you can find the install papers that came with the ottomind, it will lead you to the wire. If you disconnect it, the ONLY change will be that you are bypassing your "transmission protection".

 

[roller1000]

Cool I know the wire you are talking about, I will cut that wire and see how it works thanks!!