Here I am

Banks Stack

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

04 PDF manual...

06 stock nozzles

Status
Not open for further replies.
Just like the title says... . What stacks best and what are the other stack options that will work with the 6Gun "knob" with the Speed-Loader? Those that have stacked any combination with Banks, whats your input onto how it worked out for you. No bashers please just answers... Thanks Oo.
 
You can pretty much stack any downloader you want with the banks. I have stacked mine with the smarty. Others have done the flashpaq and torque dog. Twest is someone you should get in contact with on stacking. It is going to be safer to stack with the PDA option but you can stack without it. Twest has had some great luck with the bddl and the banks goodluck.
 
I stacked the 6-gun with my smarty junior and it works awesome. lotsa smoke off the start but it clears up quickly and is very fast.
 
I have the OttoMind6(PDA) stacked with the SmartyJr. Works great for me. I have the Jr on level 3, and I can change power with the Banks when I want more.
 
Yep,You may stack with any type of downloader,Just make sure You have support for the Stack, Turbo, Trans, intake,fuel, Etc.
 
Twest and the others runnin the Smarty - So if i go the way of a Smarty, would I just run the programs without the timing? Since Banks already adds it. Also I don't have the owners manual for the Banks system, is the #1 setting stock? If so the system is basicly off so I could run the Smarty without the Banks adding to it? Thanks for the info.
 
Last edited:
Since I have the Jr, I do not get a choice of with or without timming. But to answer your other question, #1 on my Banks PDA is stock.
 
If you wanted to run just the smarty by itself you would position the banks in the #1 position. Also I ran the programs with timing when I ran the ones with out my temps got hot fast although I have not tried it with the newer programming. If you are worried about the timing select the program for aftermarket injectors since is retards the timing some.
 
Banks and PPE HOT worked pretty sweet on our 04. 5 but they have since updated the PPE ahvent tried the latest PPE HOT
 
Well I took the plunge on the REVO and I'm impressed so far! Just runnin on SW4 and Banks on 3 to save the clutch for now. Smokes down low but not bad, then she cleans right up. Got it used from a guy local to me for 600 all its missing is the usb cable, he said it never had one so who knows... ... Need to see if I can get one from Bob or Marco. Still not runnin the timing tune yet, i'm tempted to try it though.
 
It will rattle terrible off the line when it's to far ahead,Its time to keep a new huffer in mind, your will be needing it. .
 
With my banks on six and the smarty jr. on 3 it rattles alot in the lower rpm's

just because the timing is so advanced. TWest What do you mean by huffer? are you refering to the turbo?
 
You have an aftermarket turbo and transmission dont you Jsandoval? I would think you would be fine with the smarty on 60 or 90 and then adjust accordingly with the banks
 
I have my Smarty on SW#4 and the Banks on 3. Plenty of power and still gets the mileage but the power down low is incredible! That's what the Banks setup was missing! Would like to try it up higher, but my stock clutch would be toast... ... .
 
I have my Smarty on SW#4 and the Banks on 3. Plenty of power and still gets the mileage but the power down low is incredible! That's what the Banks setup was missing! Would like to try it up higher, but my stock clutch would be toast... ... .



You just need to Upgrade your Foot . . HeHEEEEEEE:-laf
 
Status
Not open for further replies.
Back
Top