Attention: TDR Forum Junkies 
Alan Reagan
TDR MEMBER
Since new, my drivers speaker has had an intermittent bass vibration from the speaker in the driver's door.
This morning, I pulled the door panel off and snugged up the speaker screws. I'm sure that was part of the problem. Then I gently bumped the door with the back of my hand and kept hearing a slight vibration rattle. I finally found it. It was the connector just behing the door release mechanism. After placing quilting batting around the connector, the vibration is gone. I put the door panel back on, turned up the radio with full base and no more vibration rattle.
This morning, I pulled the door panel off and snugged up the speaker screws. I'm sure that was part of the problem. Then I gently bumped the door with the back of my hand and kept hearing a slight vibration rattle. I finally found it. It was the connector just behing the door release mechanism. After placing quilting batting around the connector, the vibration is gone. I put the door panel back on, turned up the radio with full base and no more vibration rattle.
