Bd diesel performance

[BD-Hector]

Hello everyone, My name is Hector, from BD Diesel Performance and Engine Brakes.

I'll be here to answer any of your Technical questions and update you with what is new at BD.



Also don't forget to check out our new products available at Gino's Garage.



Feel free to drop me a line anytime.



Regards,



Hector McLean

Tech & Sales

BD Diesel Performance

800-887-5030 ext 106

BD Power - The Leaders in Diesel Performance

 

[Bob4x4]

One thing that always interest this crowd is what new products are in the development stage. Any hints??

 

[ktb]

I have been wondering if you make a regulator for you exhaust brakes so a guy could regulate the amount of back pressure its producing to help maintain speed depending truck load and road grade?

 

[BD-Hector]

The brake is regulated to maintain 65# of back pressure throught the RPM band, but to have it at a lower rpm of smaller grades, or higher for larger, it can't be done as the engine can only handle 60/65 psi max, so we did it to maintain the maximum backpressure through the RPM band.

 

[BD-Hector]

on of our newest products for the 2000 to 2009 Dodge rams (gas or Diesel) is our sway bar end links.



Put an END to your END LINK replacements!



Due to the heavy demands put on the Dodge Ram 4WD pick-ups, one of those pesky maintenance items that are so often replaced a multiple-of-times could virtually now be replaced for the last time! The sway bar end links on the 2000-2009 4WD 2500/3500 (Diesel and HEMI) are prone to wearing or pounding out, and, even breaking when the truck is lifted on 2-post vehicle lifts due to the stress of the axel dropping.



BD's Sway Bar End Links have a Dual Pivot Design that allows for greater amount of articulation and less stress. Long life Urethane bushing design allows for greater flex without breaking and will not pound out or seize due to the elements. Things that even the competition would be envious of.



All components are designed to be easily serviceable and wearing items are low cost to replace. Kits come complete with all hardware* and can quickly be installed in approximately 1-hour.



BD Power - Product: Sway Bar End Links

 

[ktb]

i understand that you can't exceed 60 psi back pressure so that would be the max but could/would you be able to put in a regulator to lower that pressure so a person wouldn't have to turn the brake on-off-on-off because the brake is being to effective?

 

[Barry]

Tell us about the EGR-ectomy kits for removing all that garbage from the enging.