Here I am

BD Dyno Days in Abbottsford

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Arkansas?????

MAY MADNESS CB CHANNEL and HAM FREQ

Ok, OK. . I know its awfully early #ad


Dyno Days this spring is April 21st. The NW BOMBers will be convoying up there again, CB channel 12. (Scott!)

Here is the tentative agenda...

Meet at Cummins NW in Renton at 4:45am.
Depart Cummins NW at 5am.
Have breakfast in Arlington (Wellers Cafe)at 6am.
Depart cafe in Arlington at approx 7:15am
Arrive at BD whenever we all get thru customs!
Last fall, I think we had 22 trucks... think we can break this record?
If anyone has better ideas/plans... let me know. Plan ahead... its only two months from tomorrow! CBs make the trip even more fun... chattering back and forth gets interesting!

------------------
Rob Hanson
1999 "Big Red", 3500 SLT QC 4X4 6 spd, 4. 10 LSD, Braided SS fuel lines, Mag-Hytec Rear Cover, Cummins E-Brake, Blue Box, DD3 Injectors, Banks High Ram and 14cm Wastegated Turbo, All-steel Cowl Induction Hood, Cummins RED Valve Cover, Rhino, Rosewood Kit, Scotty System, SportComp Gauges, TorkLift SuperHitch, Tekonsha Brake Controller, Rear Flood lights, Cobra CB, DeeZee Running Boards, BD 2WD Low kit, Air Lift bags, Hitco exhaust blanket, air horns and a Geno's "I tromped a Ford" decal. Member of BOMB! (WW NW Chapter)

MyPics.com (pics updated 02/17/01)

I'd rather be... .
Cummin than Strokin.


[This message has been edited by Rob Hanson (edited 02-20-2001). ]
 
Looking forward to teaming up with you guys and have it on the calendar already. Plan to meet you at Wellers in the morning. Hope to have my CB installed by then. Dave
 
Doggone it! #ad
I'll be attending a wedding in L. A. that weekend!
I will be watching this topic with envy on my dad's computer. #ad

Andy

[This message has been edited by Andy Perreault (edited 02-20-2001). ]
 
Kat... I am sure we could do that... in fact, MikeR only lives a few blocks from the airport! Besides, I need to collect my free beer from ya! It really is a fun time.

I may be picking up a surprise "right coaster" at the airport, also! Let's hope so!
 
We will be there, maybe I can talk Brolin to take his new 5er. That will give it a good shake down run before May Madness.

------------------
Mike Clay
2001 HO,6 speed QC,2500,4x4Dark Garnet Red,ISSPRO E&B gauges on A Pillar, Rhino Nerf Steps Lit, Series 3000 brush & grill guard, NW Custom rocker panels, Jacobs E-brake, all options except leather, Reese 20k hitch. Towing a 30' Gulf Stream Sea Hawk 5th Wheel triple slide. The Mule
 
Count me in, I think that Piers will need to clear out alot more parking space of our little contingent.

Kat, If you catch the redeye and get in about 4:00 to 4:30am I can swing by and pick you up.

Kevin

------------------
2001 2500 QC LWB 4x4 6-speed loaded except leather, Jake E-Brake, Line-X, Stan's Headers 4" exhaust, Ramsey RE10K
 
Of course as always I'll be there. Kat and others,I live across the street from the airport,so if you want to fly in just drop me a line for picking you up. Just be sure to bring some earplugs 'cause it gets loud around here. Hehe! #ad


-Mike

------------------
'00 2500QC,4x4,LWB,Dark Garnet,6spd,3. 54lsd,SLT,DD stage II,Psychotty air,10-level PM3,Jacobs ebrake,Isspro pyro & boost gauges,2wd-low,Airoquip fuel lines,Smittybilt nerfs,BFG 285/75 AT's,Midland cb,Clarion 6-disc changer
 
Kathy and I are in. Maybe Cumminntstrkn, Papa Joe, Vaughn and can BOMBvoy over together.

Cumminntstrkn (Jim),
Have you met Ol Ron over there in Helena yet? Maybe he might come along with you. While driving around look for the guy I was telling you about. White truck like mine, brush guard, white canopy, debadged, has pinstripping and a 4" downturn pipe. When I talked with him he was really interested in going to Dyno Days.

[This message has been edited by BIG BOB (edited 02-20-2001). ]
 
Can't Wait! #ad


Maybe I'll even have all of my modifications completed by then. #ad
Well maybe. #ad


Remember, we will have to limit our convoy to 65 mph as that's about redline on Rob's 4. 10 equipped Ram. #ad
#ad


..... maybe Rob should leave a day ahead of time so he can arrive at the same time we do. #ad


Flame on baby!

Hopefully Ean will be back from his job in Montana before Dyno Days. Congratulations Ean... not only on your new job but in becoming a TDR member as well. #ad
 
It's on the calendar. Never owned a CB in my life, but guess what I'm in the market for... ... ... ... ..... #ad


------------------
White 2001 QuadCab 2500 Laramie SLT, HO 6-speed, 3. 54 limited slip, Mopar exhaust brake, towing/camper options, Rhino liner, Grover Air Horns (not yet installed), Un BOMBed (so far), DUAL AIR BAGS !!
 
<font color=blue>If someone were to "fly" in for the day, would one of you kinda people have time to pick that person up and drop him back off at the airport?

Just pondering..... #ad
 
Sam... yes, it is only a one day event. Starts early in the morning and is over about 4pm or so. Some people stay overnight to keep from having a long day, but most of us come home.
 
I'll be there (and my credit card)! Maybe I can drive a clean truck this time #ad


------------------
98. 5 3500 SLT Quad Dually 4x4. 3:54 Auto, Waterfall Blk on red. Custom dually flaps, Rhino lining, All acc's w/leather, Muth signal mirrors,
BD exhaust brake, dash mount Banks guages, Mag-Hytec Diff. cover & trans. , SS bug screen and fender trim,SS Stull diamond line running boards, SS 4" turn down.
 
Hmm i think I just may make this one. Rob Will you be doing any bombing before hand? #ad
I really need to add some gauges, and if anyone can help me this my hardline issue, that would be great. I have the PS. Im to much of a newbie at this to do it my self. Im also going to see if if bill can fit me in for a VB and TC possibly sometime in there. I want that VA or ezeeeeeee box #ad
Then im done~~~~~~~~~~~~I hope.

Sky

------------------
2001 QuadCab,SWB,Auto, 4X4,4" Flowmaster Exhaust, Bosch 275 Injectors, K&N... ... ... .
 
Planning on representing the 1st genners!

Caleb+Vicki

------------------
1993 LE W250 4x4 CC,Auto,3. 5's,LS. . Diamondplate,PowerWagon injectors,K&N,Egt,Boost,trans temp VDO Vision series, BD 3 1/2" Exhaust, 16cm housing,Mag Hytec Diff+ Trans pans,Transgo TFOD shift kit,Roadmaster Active Suspension.

Caleb Reese (per forum guidelines)
 
i will be going to BC for a seminar and i think i'm going to plan it around this event ... so i guess myself and another member from mass. will represent the northeast . wonder if i can bring my bombs and rent a cummins for the week ??? #ad
 
Back
Top