Best Pressure box to stack with BDDL and TST

[CStraface]

Have an 05 single cab, just added a stage II cp3 from II. I have a TST w/ BDDL already on the truck. Looking to add some pressure, which one? Mp-8? Edge EZ, Van Aaken????

 

[C. Harlan]

Hope you are bringing that thing to the Dyno Day in March, see the events page. .

 

[mykal41]

V. A. all the way...

 

[CStraface]

Hope you are bringing that thing to the Dyno Day in March, see the events page. .

I dunno... I guess ya'll will have to wait and find out

 

[PBax]

Dr. Performance's newest pressure box does very well... . rated at 110hp



I love my Quad XZT with the timing removed. 65hp of pressure with boost fooling!

 

[JVolpe]

I use an EZ and had it stacked with HOT Juice/Attitude, TST/BDTD and now with TST/Smarty. It has worked very well in every stack. Not as granular with adjustments as some like the MP-8, but it has not caused any problems either. It has helped add low end and smoothed out the power in every stack so far.

 

[Mark Craig]

CStraface,



The TS Performance MP8 has infinite adjustability so you can set it exactly where you want it vs a non adjustable or a manufacturers idea of output selection etc. Most folks find it much more versatile.



Mark @ DPPI

 

[JCleary]

MP-8, no question.



Infinite adjustability is killer when tuning your truck by your rail gauge.

 

[RobertP]

when tuning this combo you really need to be carefull, the bd allready alters rail pressure so you want a box like the V. A. that only does 26k, but the ts is also a good choice.

 

[Reb.B]

the Quad box is one of the cheapest Don M makes one too i heard. Its not complicated. The Bully Dog may raise pressure on crazy larry, but on any of the other levels it sure doesn't.

 

[lmills]

The Crazy Larry does not raise rail pressure either. As for the MP8, a bunch of guys have been having injector failures with the MP8 on trucks with the modded cp3s. The pressure spikes from it are too harsh and killiing the injectors.



I have had real good luck with my Sp diesel module and would recommend either that, the Predator pressure module or as mentioned Don M's pressure box.

 

[CStraface]

So would it be advisable to not run a pressure box until I have some of Don M's injectors?