Better turbo to twin with?

[ASTAR]

I am considering getting in on the group buy for a turbo and was wondering which one would be the better one to get to add to my KSB1-2. The choices are...

bht3b w/26cm undivided housing

bht3e w/23cm divided housing

bht3e w/20cm divided housing

I'm willing to add even larger injectors (like Mach 5's) and I do tow about 8k once or twice a month.



Also, where can I get piping for these? I don't mind getting pieces and TiG'n them up myself

 

[swankmetal]

when it comes time to do my set-up, i'll just be getting a handful of 90's from napa. for the flanges, i know a guy, who knows a guy with a cnc plasma. throw some sparks, and i'll have two turbos turning at the same time. then i might have to find some fuel somewhere.



dave

 

[Mark_Kendrick]

I am considering getting in on the group buy for a turbo and was wondering which one would be the better one to get to add to my KSB1-2. The choices are...

bht3b w/26cm undivided housing

bht3e w/23cm divided housing

bht3e w/20cm divided housing

I'm willing to add even larger injectors (like Mach 5's) and I do tow about 8k once or twice a month.



Also, where can I get piping for these? I don't mind getting pieces and TiG'n them up myself

The BHT3x doesn't hav ethe flow to properly compound with a B1. To do it right you need at least a B2 and for all out HP you need a BigBrother. Or you could do like MadDog and run a B52... it looks more like a pratt$whitney than a turbo



I build kits with the B2. the BB is a one off. I've done it before but there's not a lot of demand for twins with a $1600 and a $1900 turbo.



With b1-b2 twins or B1-BB(more of a race set) any injector your pump can atomize properly will work.



FWIW,

Mark