beware of quadzilla

[ROCKJEEP]

Then what was thewhole reason for the thread. Its seemed that your intent was to bash him. He was an upstand guy and defended himself(props to him). seemed he had and answer to all of your questions. I don't think this was the right way to do it. We all know he is always on here and a pm would have worked. if you didn't intend to bash him them to let you know from the other side your wording was all wrong and looked like a major bash almost as if you were calling him a lying cheater.

Kory

 

[CMast]

i never called him out in my original post he jumped on board and made me out to be a liar. he knows as good as i do that we exchanged several pm's and i felt like it was going no where after i answered all his questions he edited his post and found where they had billed my cc so rock jeep i'm sure you have formed an opinion of me as i have of you

 

[bcpalmer]

I have a Quadzilla Xzillaraider XZT module. I have never had a problem. But I have contacted Quadilla about information concerning other mods and their compatably with the module. I have always received excellent service.

 

[ROCKJEEP]

never saw a edit or post where he stated you were right and he was wrong. stils smells like my babys diaper.

 

[CMast]

08-10-2006, 03:02 PM

qzilla



Quadzilla Performance Technologies

Offline

Join Date: Jan 2003

Location: Texas

Posts: 321



Re: module



--------------------------------------------------------------------------------



Quote:

Originally Posted by CMast

well i installed my updated chip last night and started the truck, things seemed ok until this morning less then two miles down the road i had some vibration check engine light came on code p0237 the same as before

cmast









At this point we know the module is good.



So the next thing to do is check all of your connections. I would take a close look at your MAP sensor. It is either plugged in wrong or not plugged in good. I guess the wiring could also be damaged?



Check all the pins on the 4 pins connectors as well as the blue wires going to the 12 pin connector that goes into the module.



Now that we have replaced the module it is pretty much 100% that it has to be in the wiring or installation.





Quad

__________________

Quadzilla performance Technologies Inc. 888-842-6572, 2003 Twin Turbo Automatic

maybe now rockjeep sill let it go

 

[JFarnam]

cmast... How about MOVING ON AND QUIT CRYING.

 

[ROCKJEEP]

08-10-2006, 03:02 PM

qzilla



Quadzilla Performance Technologies

Offline

Join Date: Jan 2003

Location: Texas

Posts: 321



Re: module



--------------------------------------------------------------------------------



Quote:

Originally Posted by CMast

well i installed my updated chip last night and started the truck, things seemed ok until this morning less then two miles down the road i had some vibration check engine light came on code p0237 the same as before

cmast









At this point we know the module is good.



So the next thing to do is check all of your connections. I would take a close look at your MAP sensor. It is either plugged in wrong or not plugged in good. I guess the wiring could also be damaged?



Check all the pins on the 4 pins connectors as well as the blue wires going to the 12 pin connector that goes into the module.



Now that we have replaced the module it is pretty much 100% that it has to be in the wiring or installation.





Quad

__________________

Quadzilla performance Technologies Inc. 888-842-6572, 2003 Twin Turbo Automatic

maybe now rockjeep sill let it go

Didn't read anything about charging you. Also noted the chip was ok and could be a bad install.

 

[2broke2smoke]

must be frustrating trying to run a reputable business and dealing with this kind of chicken**** at the same time

 

[RustyJC]

must be frustrating trying to run a reputable business and dealing with this kind of chicken**** at the same time

Makes me glad I've worked for an industrial versus a consumer retail company for the last 32+ years... .



Rusty

 

[Slingblade]

Quadzilla

I got my ZXT box about 9 months ago. Only problem I have had was a slight surge when I key the CB. Quad offered to provide a soloution as soon as I PMd him. I declined as the box was much better than the edge box I had and a slight surge was something I could live with. My opinion is that they have some very good products, good prices and outstanding customer service. I could not be happier.

 

[Parks]

This thread has lost its usefulness. :-{} I am locking the thread and I will leave it up for the weekend so that all involved can see. CMast I would suggest contacting Quad and fixing this problem either over the phone or over pm's. If you have a problem with this..... pm me.