Here I am

Big horn ram specs?

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Rear Brake Pads

Rear-Door Wiring...

Status
Not open for further replies.
Any news on the "Y"???? My boss just picked up a half-ton (wimp) "big horn" and i'd love to add it to his, as well as my own!!!
 
Good idea!!

OK, now you guys have done it.
I just went out and looked at my BIG HORN, and there is plenty of room for adding a Y, on both the L and R side.
Also I measured the Y in HEAVY DUT'Y'(at 1&1/4" ht. ) on the tail-gate, but it's too tall.
I need two chrome Y's about 3/4" tall. Where can I get some?
It will be somewhat inconspicuous, but it should bring some smiles to the die-hard Dodge fans.

Ray

:DHeheheeee! ... now THAT is a good first MOD for me to concentrate on . . sweeet! That would be sure to draw some looks and comments. Let me know if you find a vendor that can supply those "Y's". :-laf:-laf:-laf
 
OK guys, I got a set and installed them. I stepped back to marvel at my work, and it did bring a smile to my face.

The down side is, they are not an exact match. The finish and height of the Y's are good, but the actual width is only about half of that as on the stock lettering. (3/4" verses 1-3/8") The body of the letter is also skinnier. The differences didn't show up that well in the pictures on the web site. They'll have to do untill I find something better.

The company is, Chrome Letters and Numbers. -9550 W. Sahara Apt. 2112- Las Vegas, NV 89117. His site is the same name with a .com or a .org.

If you don't like them, they are not that expensive. $2. 75 ea. + $8. 40 shipping.

I would post a picture, but I don't know how yet. I'm still learning this computer stuff.

Ray

PS. Item #Small-Block-33964
 
We need to get a picture of this! I have already wasted to much time at work today trying to find the perfect match decal!
 
Status
Not open for further replies.
Back
Top