Bigger turbo after a few miles

[AllGoodHaywood]

I just added a B1-02-04W to my arsenal along with the HOT Juice/EZ stack and I took it on a 5 hour road trip to break it in. 3/4 the way through the trip I noticed I lost power at start up. The truck runs and idles great so I dont think anything broke. It just needs to spool to 10-15 psi and 2000+ rpms before the truck gets moving. Is this normal? Is it my boxes? Stock Injectors?I have no idea, but I know I lost that 1600-1800 rpm grunt and now it waits to spool. What would cause the truck to now require more boost to get moving?



My truck has only 4950 miles, and I also just added the DTT transmission so I don't think it's the transmission slipping. The wastegate is set to 40 although on the Juice/A I have only seen 36-39. Also I am now hearing the turbo chuffle quite a bit and it didnt do that at first. Any help would be great.

 

[AllGoodHaywood]

Just got off the phone with Olee from Power by Poole and he says it might be boost leak or my EZ went down. Anyone know of a good way to check the EZ?

 

[SRadke]

One easy thing to do is pull the intake tube and check to be sure the turbo spins freely and the shaft doesn't have endplay.

 

[JensenC]

Did you install everything yourself or did you have a shop do it? If you dropped that much coin at a shop, I would take it back there and have them make sure everything is running right. Youl should be able to turn to wherever you bought the stuff from for tech support.

 

[Mundgyver]

Check your grounding for the Edge.