Here I am

BILSTEINS SHOCKS

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

ok guys, i need a little help

Ladder Bars

Status
Not open for further replies.
Went to Campers World today to order set of shocks for my 01-3500. They called Bilstein for the part numbers. Bilstein stated they have not looked at 2001 models yet and are not sure if the 2000 shocks will fit.
QUESTION? Does anyone know if the 2000 models shocks fit the 2001?

------------------
2001. 5-3500QC,4x4,ETH~DEE,SLT,4:10. EVERYTHING (AND THEN SOME)BUT LEATHER & SNOW PLOW. A PILLOR MOUNT/TWITTER,ISSPRO,PRE,POST TURBO,BOOST. JACOB'S E-BRAKE.
 
I was going to order a set myself soon for my 2001. When i inquired about them they said they use the same as the 2000. There were no changes to the suspension between those years.
 
EMDDIESEL-Thanks for the reply. I think I will call a local Dodge dealer parts dept. and inquire if there is any difference between their stock part numbers between 2000 and 2001.



------------------
2001. 5-3500QC,4x4,ETH~DEE,SLT,4:10. EVERYTHING (AND THEN SOME)BUT LEATHER & SNOW PLOW. A PILLOR MOUNT/TWITTER,ISSPRO,PRE,POST TURBO,BOOST. JACOB'S E-BRAKE.
 
I have seen camping world prices on these and was not inpressed! Check the internet, I got mine for $49. 95 each from some 4wd offroad site. (can't remember the name, sorry)

Originally posted by Elk Man:
Went to Campers World today to order set of shocks for my 01-3500. They called Bilstein for the part numbers. Bilstein stated they have not looked at 2001 models yet and are not sure if the 2000 shocks will fit.
QUESTION? Does anyone know if the 2000 models shocks fit the 2001?

 
Elk Man... .

I may be offering the obvious here, but rather than relying on Campers World why not call Bilstein yourself. 800. 537. 1085

Be persistent. When I called them re: application for my 2001. 5 2500 they gave me the numbers straight out. I seem to recall they qualify the truck to some degree by GVW. I had seen the same PN's posted on the TDR for a 2K truck like mine, so I really doubt there is any difference for the 3500.

BTW, these are the best shocks I've ever had on any vehicle... including Edelbrock IAS.

Good luck.

------------------
White 2001. 5 2500 ST, SWB, 4X4,QC, AUTO, 4. 10's, LSD, 285/75/16 On Weld Outbacks, PIAA 510's, Line-x, Tinted glass, Redline 85+, Blow-by-bye, RE-0880 & 25-0880,muffler fell off,level truck with 2" tuff country kit, Bilsteins at the corners, Di Pricol egt and boost, Mag-hytec "original flavor" transmission pan and Dana 70 diff. cover, Westin Step Bars,DTT TC/VB,yeee-ha,EZ, Custom Plate 24V-DSL
 
Bob, your URL didn't work for me #ad


24v-DSL, what are the correct part numbers for the Bilsteins in case I find a good deal on them (maybe I can get Bob's URL above to work... )

Thanks,
Tom

------------------
-- email address removed --
Godzilla: Patriot Blue 2001 2500 SLT QC 4X4 LWB ETH/DEE, Tow & Camper packages, 3. 54 Ltd. Slip, 4 wheel disc ABS, Isspro EGT/boost gauges, DD Stage 3 afterburners & boost module, 4" Jardine exhaust, Amsoil, Psychotty air, black SmittyBilt nerf bars, no silencer ring, Armacoating bed liner, TDR decal, Jack holiday antenna ball

NRA Life/CRPA/El Dorado #26 F. &A. M. of California
 
Last edited by a moderator:
Hi Tom...

Bilsteins for 2500 4X4

Front - BE5-2549
Rear - BE5-2550

My Bill K. ,EZ, and Bilsteins. Three mods I wouldn't sell,swap or replace free with other brands. Joe

------------------
White 2001. 5 2500 ST, SWB, 4X4,QC, AUTO, 4. 10's, LSD, 285/75/16 On Weld Outbacks, PIAA 510's, Line-x, Tinted glass, Redline 85+, Blow-by-bye, RE-0880 & 25-0880,muffler fell off,level truck with 2" tuff country kit, Bilsteins at the corners, Di Pricol egt and boost, Mag-hytec "original flavor" transmission pan and Dana 70 diff. cover, Westin Step Bars,DTT TC/VB,yeee-ha,EZ, Custom Plate 24V-DSL
 
Status
Not open for further replies.
Back
Top