boards on the way

[Plazman]

Went to Northwest Running boards and ordered a set of Stull cab length stainless tapered boards. Also got the wheel trims, and mud flaps. They will be installed next week. I tossed it back and forth whether to get the bed pieces, but decided not to because I have a cap on the rig, and it seemed they woudn't be much help, and for the bucks it just wasn't worth it.

The salesman there seemed very knowlegeable, and was not in anyway pushy. I just hope they do a good job installing them!

I'll try and get a before and after pic.

By the way, what size is the 32000 bytes for the pics,anyone know?

Course I'll have to WASH it first!

The NWRB store is in Clackamas, Oregon, anyone with experiance of that company? Just hoping I don't have any trouble.

 

[Pawpaw]

To me, cab only boards just look unfinished. Besides, they add a bit more protection for the thin paint.



#ad

 

[mfrost]

Boards look great. I like the boards better than the nerfs. My boards are the Mopar ones and were installed before I drove her off the lot. No chips yet. They are about the same as yours but are bull nosed . The full length sure helps getting things out of the bed or tool box.



Check out the pics.

 

[Plazman]

UPDATE

Got them on today!

Had to go with the full load as you guys said, it just didn't look finished.

Before shot

 

[Plazman]

After shotOo.

 

[sbrennan007]

Looks good. Any other pics from the side to see them better?

 

[Plazman]

more pics

Im' having some difficulty postin' pics, I have lowered the settings on the camera to 1m and set the size to 320X240 hope this works.

 

[Plazman]

still not very good,,,maybe someone will tell me what i am doing wrong???

How do you get a good sized pic on here?:{

 

[Deed04]

Those look great!! Does the place you bought them have a web site. I wouldn't mind getting some.



Thnx for any info. .

 

[Plazman]

Yes, Deed04, they have a web site at nwrb.com but I checked it out and they don't show those on their site, strange but true.

anyway they are STULL Diamond line tapered boards, and i'm sure you can find them in your area. they are polished stainless steel.

the "nwrb" stands for northwest running boards by the way... lol

I went there because a relative of mine also has a Dodge 2500 (although it's a Hemi) and got some aluminum boards with a rubber cover on them, they look good too, (his is a short bed).

This company is also a distributer for AFE, Bullydog, and other such goodies, I'm trying very hard to contrll myself!!!

You could just go to Stull on the web and do a dealer locater, if your interested.

Thanks for the complement guys

 

[SRadke]

Set ups a readers rigs gallery for yourself and put the pictures in there. It will take pics up to 122k. After you get the pictures in there you can copy then paste the forum codes for the pictures here and the pictures will show up. They'll be much larger.



-Scott

 

[Vaughn MacKenzie]

Plazman the boards look great. claymike also got these boards on his truck, might have gotten them at the same place (lives somewhere in the Portland region). Where are they at exactly, Vancouver/Portland area?



Check out www.nwbombers.com sometime, we have a very active group and lots of fun stuff going on



Vaughn

 

[Plazman]

Vaughn,

They are located in Clackamas, Oregon. I think they do have more stores around the the area tho.

Their address is 10325 SE hwy 212 Clackamas,Ore 97015

Ph 1-800-876-7866

From the columbia river, just go south on I205 to exit 12A, take a left and go about 3/4 mile, their on the left side in an old pole type commercial building, faded green color.