Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
TDR Magazine subscribers receive more than the magazine! You also gain additional forum privileges!
Details here: TDR Privileges
Subscribe to TDR Magazine here: https://www.tdr-online.com/
Attention: TDR Forum Junkies To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.
I'm not sure about the kit in JC Whitney, but if I had to do it over again I would still use the Performance Accessories kit. Everything except the rear bumper brackets (which are available seperatly) was included.
National Tire and Wheel has the kit for about $170ish (for 3", the 2" is a tad less I believe) they're number is 1-800-847-3297 or the website www.ntwonline.com
Here is a link to the thread after I installed my kit, it contains the issuse which you will encounter along the way, not a big job, maybe 3 hours. Good luck!
I called Performance Accessories, they told me the reason not to install one on a diesel is because THEY have never tried to see if it would work . That was the only reason they gave me, nevertheless, it works fine with some minor alterations.
Keep in mind that Rob put one on an '01 - not the new body style '03. There may be issues with the '03 - until someone puts one on we won't know for sure.
If you want a 6" lift I HIGHLY recommend the D1ck Cepek kit with the Skyjacker 7" coming in at a close second. Research Superlift before you make your decision. Unless they have changed their setup they are no where near the quality of the SJ and DC lifts.