Body Side Moulding

[Archive]

Does anyone have the part numbers for the black moulding pieces that go in front and in back of the rear wheel on the bed of a 2001. It seems like each year there is less and less moulding. I emailed Mike Crossley as I saw the pictures of his 2001 with the complete side moulding but I haven't heard back from him.

 

[Archive]

My dodge dealer says there is no such part(s.
I've been looking too #ad
.

 

[Archive]

I agree... I think Mike's rig looks good with the moulding. My truck is all white and the first time I saw it, it looked a little naked in the hind quarters...

------------------
'01 2500 SLT+, QC, LWB, 4X4, 3. 54s, AT, every option but running lights! To come: 19. 5"s (?), lift, Line-X, Exhaust brake, 4" turbo to tail, etc...

'98 DUCATI ST2 "Bombed" 944CC with Ducati Performance Carbon Fiber Exhaust, F. I. M. Chip, K&N and "modified" air box.

 

[Archive]

I put the moulding on my white 2000 3500. Tell your dealer to look up the mouldings for the '99 year trucks. They will fit. My dealer, Karl Klement CPD, has sold so many of them, they have them in stock.

Bill

------------------
Y2K 3500QC, 6 Speed, 4. 10, SLT+, Camper & Tow Pkg. , Westin Chrome Nerf Bars, Mopar Flaps, Reese 20K Hitch, V-A CPC, EGT & Boost Gauges, RPM 45 Gallon Aux. Fuel Tank, Highway Products 5th Wheel Toolbox, ECM Controlled PacBrake, Painless Wiring Kit, Mag-Hytec Diff. Cover, 80% Towing Hitchhiker II 31', 2 slideouts, 19,750 GCW

 

[Archive]

99' was the last year for the bed trim. However, none of the trucks(98-99) ever had trim behind the rear wheels. The trim you see behind the rear wheels is actually 99' short bed trim pieces that came from the factory in front of the rear wheels. I am refering to 2500 models here.

Though I don't have the part numbers at the moment, here is what you need to get if you have a 00'- 01'. If you have a short bed, then you need to get four bed trim pieces for a 99' short bed. Put two in front of the rear wheels and two behind the rear wheels. If you have a long bed, get two 99' long bed pieces for in front of the rear wheels and two 99' short bed pieces for behind the rear wheels.

If you have a 98-99(LB or SB), you can still get two 99'short bed pieces for behind the rear wheels.

If you have a 00'-01' 3500, then you need to order all the bed trim pieces for a 99' 3500. I believe there are eigth total pieces for that application.

I have done this trim on two 2500 LB's, but can't verify the fit for a SB. A guy in issue 28 put them on a short bed though. I have the part numbers somewhere, if I can find them. I know this info might be obvious to some, but hope I helped a little.

 

[Archive]

I purchased the front bed mouldings for my truck. I havent decided about putting on the rear moulding as yet. I will set up a new posting with the part numbers for both mouldings tomorrow night.

------------------
2001 HO 6spd,Quad cab,LWB,4x4,Flame Red,all options except for leather,Westin Brushguard/Push bar (more to come)

 

[Archive]

I've always said,it looks like the truck just came back from the bodyshop and they forgot to put on the bed mouldings on!

I also went and got the '99 bed mouldings from the dealer. About $22 bucks each.

-Mike

 

[Archive]

This is what mine looks like.....

#ad


------------------
Ordered on 2/7 in my driveway on 3/24 2001 2500 SLT+ 4X4 Auto Cummins, 3. 54,Quad cab,Short Bed,Camel Leather, White Exterior, Sliding rear window, Camper Special Group, Towing Group,A. R. E cap with rear door, 25'Dutchman camper

 

[Archive]

The part numbers are ... .

SWB front bed molding 98-99: 55076891AA
LWB front bed molding 98-99: 55076902AA
Dually front bed molding Right side 98-99: 55076900AA
Dually front bed molding Left side 98-99: 55076901AA
Dually Fender Molding, front, right side 98-99: 55076898AA
Dually Fender Molding, front, left side 98-99: 55076899AA
Dually Fender Molding, rear, right side 98-99: 55076892AA
Dually Fender Molding, rear, left side 98-99: 55076893AA

Courtesy of my Mitchell manual from the local CPDJ dealer who got tired of looking up "obscure" Jeep parts for me. #ad


------------------
Sam Houston
'00 QC, SB 4x4, 6 speed, SLT, White over Driftwood, Line-X, Cummins/Jacobs e-brake, Jardine 4" exhaust, NW Custom flaps used to tow my Jeep to the trails ... ...
Rating about a 4. 5 on the STHM scale

'98 Jeep Wrangler (TJ) ... severely BOMBd

 

[Archive]

I kind of like the pre '98 moulding, the flatter looking stuff with the chrome strip, and probably actual rubber instead of plastic #ad
Anyone know the numbers for these pieces going from the front to the rear? How about in your Mitchell manual, Sam?

On my '98 I ripped all the moulding off and thought the truck looked much better. But you lose door-ding protection. Of course the Sport models don't come with the trim. I might also check the JC Whitney catalog.

Vaughn

 

[Archive]

Geeze ... . I'm wearing out the pages of this thing ... .

Al these part numbers are the 94-97 style moldings ... .

Front fender, right or left: 55274892-3
Door, right or left: 55274894-5
Reg. Cab Side (behind door): 55274896-7
Club Cab Side (Behind door): 55274898AB rt side
55274899 lft side
Bed side, SWB, front: 55274900-1
Bed side, LWB, front: 55274902-3
Bed side, Dually, front: 55076480-1
Bed side, SWB, rear, SRW only: 55274904-5
Bed side, LWB, dear, SRW only: 55274906-7
Dually Flares, front: 55076482-3
Dually Flares, rear: 55076490-1



------------------
Sam Houston
'00 QC, SB 4x4, 6 speed, SLT, White over Driftwood, Line-X, Cummins/Jacobs e-brake, Jardine 4" exhaust, NW Custom flaps used to tow my Jeep to the trails ... ...
Rating about a 4. 5 on the STHM scale

'98 Jeep Wrangler (TJ) ... severely BOMBd