Bolt Size

[ray1933]

I'm going to remove the rear seats if I can figure out what size socket to use. 3/4 or 13/16th will not work and none of my metric fit.

I know, I know, why I'm I removing the rear seat?? Well we got this rig to haul the camper and 2 or 3 big dogs to Dogs Shows.

The 95 would do the camper fine but was crowded for the dogs.



I'm going to put in a nice padded floor that will fold up to get to the storage area but first I need to get the seats out



See what I mean by BIG Dogs.



Okay, so the photo is in the next post.

 

[ray1933]

BOLTS

Big Dogs

 

[CAKUZ]

Ray;

An 18mm socket fits the rear seat bolts. (Just checked) Seems like all the socket sets have 17mm & 19mm but no 18mm. I got my 18mm Craftsman socket seperate at Sears. I find I need it often.

Would you sell your 'flat load floor' if you have one? Thanks

Chuck Ashley

 

[ray1933]

Rear Floor

CAKUZ



Thanks for the info on the socket size. Will have to pick an 18MM socket. Do not have the fold down floor.

 

[nickleinonen]

18mm is common on gm trucks. that is the size screw head on the tosrion bar keys and shocks... looks like it'll become common on the dodges too...