Engine/Transmission (1998.5 - 2002) BOMB's are in...

[truckstom]

DD2's and the comp are in... ... yeah that's my grin...

The DD's went in Saturday. The comp went on today. So I went for broke and set it on 5x5 right out the gate... . whew... everything's still tickin'... Gonna dyno it on Saturday to see where I'm at... love that feelin'.





ToM!:-laf

 

[Bob Wagner]

congrats Tom

 

[csutton7]

yes that's a good feeling--congrats--chris

 

[truckstom]

thanks guys,

some further testing... seems the new comp isn't acting right... gonna dyno Saturday as planned to make sure before I send it back.

 

[Bob Wagner]

did you use the scotchlok connector? and did you use dialectric grease on the connections?

 

[truckstom]

Originally posted by Bob Wagner

did you use the scotchlok connector? and did you use dialectric grease on the connections?

Yes... both. we checked and double checked the pump wire. It acts like it's just stuck on EZ mode... all the lights work, there just doesn't seem to be any difference in power from 1 to 5. I'll know on the dyno...

 

[JaMan]

Truckstom I'll meet up with you Sat. My comp wire hooked up wed. doesn't pull as hard as I would have expected either but the clutch is still stock so that may be the problem, maybe we can swap controlers and see if there is a difference. PM me about Sat. Or just call my # is on the other thread.





Jared

 

[truckstom]

JaMan,

that would be ideal to swap out controllers... what time Sat. ??

 

[powerwagon440]

i had the same problem as ur having after putting on my edge drag box!! was no difference for level one to 5 after check all connections twice i found that the connector that connects to the scotch lock connector was loose and not fully on tight!! shoved back on and made sure it was on there and went out for a ride and!!!!!!! that was my problem been happy ever since!!!

 

[truckstom]

Originally posted by powerwagon440

i had the same problem as ur having after putting on my edge drag box!! was no difference for level one to 5 after check all connections twice i found that the connector that connects to the scotch lock connector was loose and not fully on tight!! shoved back on and made sure it was on there and went out for a ride and!!!!!!! that was my problem been happy ever since!!!

OK, we looked that over, but not REAL good. Will check that again... thanks.

ToM!